Hello,Here is the config on R6 the Rip router receiving the redistributed Eigrp routes: R6#r 178.1.0.0/30 is subnetted, 2 subnets C 178.1.10.0 is directly connected, TokenRing0 C 178.1.10.4 is directly connected, Ethernet0 C 192.168.1.0/24 is directly connected, Serial1 181.16.0.0/30 is subnetted, 4 subnets R 181.16.2.4 [120/2] via 178.1.10.5, 00:00:00, Ethernet0 [120/2] via 178.1.10.1, 00:00:06, TokenRing0 R 181.16.2.0 [120/2] via 178.1.10.5, 00:00:00, Ethernet0 [120/2] via 178.1.10.1, 00:00:06, TokenRing0 R 181.16.2.12 [120/2] via 178.1.10.5, 00:00:01, Ethernet0 [120/2] via 178.1.10.1, 00:00:07, TokenRing0 R 181.16.2.8 [120/2] via 178.1.10.5, 00:00:01, Ethernet0 [120/2] via 178.1.10.1, 00:00:07, TokenRing0 R6#ping 181.16.2.10Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 181.16.2.10, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/17/36 ms R6#ping 181.16.2.2Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 181.16.2.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/24/40 ms R6#ping 181.16.2.1Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 181.16.2.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/30/64 ms R6#ping 181.16.2.9Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 181.16.2.9, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 8/30/64 ms R6#ping 181.16.2.13Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 181.16.2.13, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 36/69/96 ms R6# Why can't it be the same on R2 the Eigrp router?Thank you for all your help.Sincerely,CN
------------------------------------------------------------------------ Tired of spam? Get advanced junk mail protection with MSN 8. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63901&t=63901 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]