I am not sure if I undertood your question. You are not going to see RP information on the 6509. You are only going to see it if the MSFC acts as a RP for a 5500.
"puro prasad" @groupstudy.com em 28/02/2003 05:14:30 Favor responder a "puro prasad" Enviado Por: [EMAIL PROTECTED] Para: [EMAIL PROTECTED] cc: Assunto: MLSRP [7:64054] Hi everyone the 'mls rp management interface' command is not to be seen on any of the MLSRP interfaces. Could this create any problems. My setup: Collapsed core lan switching network two redundant 6509s at core, 4006 at access layer. 'mls rp management interface' given on VLAN1 interface on one of the core switches but nowhere on the other. all swiches belong to same VTP domain. MLS is globally enabled on both the core switches. Anyone, any help....... Regs., Prasad. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64075&t=64054 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
