I dont beleive it will work on routers that are frame switching in the lab..I thought I read that it will only work with the real frame relay switches...
Larry Letterman Network Engineer Cisco Systems ----- Original Message ----- From: John Tafasi To: Cisco Group Study ; ccielab Sent: Saturday, March 01, 2003 6:47 PM Subject: Configuring CIR on a cisco 2522 FR switch Hi group, I have a cisco 2522 router that is configured as a frame relay switch. I am trying to configure CIR on serial 4 so that if the router connected to s4 is sending more traffic than the configured CIR, packets will be dropped at fhe frame relay switch. I configured the CIR on the switch but it seems that the router connected to s4 can still send traffic at rates exceeding the CIR, and the FR switch will not drop any packet. Can some one give an advice here? Below is the configuration of the frame relay switch. Frame_Relay_Switch#show run Building configuration... Current configuration: ! version 11.2 no service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname Frame_Relay_Switch ! enable secret 5 $1$dzof$Eb3uuMoHCj2x4/dCZFZ5T. ! frame-relay switching ! interface Ethernet0 no ip address shutdown ! interface Serial0 no ip address shutdown ! interface Serial1 no ip address shutdown ! interface Serial2 no ip address encapsulation frame-relay clockrate 64000 frame-relay intf-type dce frame-relay route 104 interface Serial4 401 frame-relay route 105 interface Serial5 501 frame-relay route 106 interface Serial6 601 ! interface Serial3 no ip address shutdown ! interface Serial4 no ip address encapsulation frame-relay clockrate 64000 frame-relay class para frame-relay intf-type dce frame-relay route 401 interface Serial2 104 frame-relay route 405 interface Serial5 504 frame-relay route 406 interface Serial6 604 ! interface Serial5 no ip address encapsulation frame-relay clockrate 64000 frame-relay intf-type dce frame-relay route 501 interface Serial2 105 frame-relay route 504 interface Serial4 405 frame-relay route 506 interface Serial6 605 ! interface Serial6 no ip address encapsulation frame-relay clockrate 64000 frame-relay intf-type dce frame-relay route 601 interface Serial2 106 frame-relay route 604 interface Serial4 406 frame-relay route 605 interface Serial5 506 ! interface Serial7 no ip address shutdown ! interface Serial8 no ip address shutdown ! interface Serial9 no ip address shutdown ! interface BRI0 no ip address shutdown ! no ip classless ! map-class frame-relay parameters frame-relay cir 300 ! map-class frame-relay para frame-relay traffic-rate 1000 frame-relay cir 1000 frame-relay bc 1000 ! line con 0 exec-timeout 3 0 line aux 0 line vty 0 4 login ! end Frame_Relay_Switch# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64195&t=64195 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
