If the Livingston port is a eia-232/DTE then you're basically set to go. Just use a roll-over cable. On the chance that the livingston port is a DCE, use a straight-through cable (which might be the answer since it was a female to begin with).
scott -----Original Message----- From: John Golovich [mailto:[EMAIL PROTECTED] Sent: Monday, March 03, 2003 9:53 AM To: [EMAIL PROTECTED] Subject: pinout for terminal cable [7:64269] Can anyone help me for the pinouts for this cables. >From the back of a Livingston Portmaster 2E I have a gender changer plugging into a db25 cisco terminal to rj45 adapter. >From here I want to plug a cat5 cable into the console of my ciscos. I could use some help with the pinouts if anyone has already done this. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64285&t=64269 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
