Randy, Have you ever gotten ISDN to work between these routers by checking end to end connectivity via ping?
Rich ""McHugh Randy"" wrote in message news:[EMAIL PROTECTED] > Can anyone spot a problem with this configuration as to why it may not be > working - R1 is connected to R2 with an isdn switch. > r1 > interface BRI0 > ip address 150.100.7.1 255.255.255.0 > encapsulation ppp > ip ospf demand-circuit > dialer idle-timeout 60 > dialer map ip 150.100.7.2 broadcast 2002 > dialer-group 1 > isdn switch-type basic-5ess > ppp authentication pap callin > ppp pap sent-username james password 7 070C285F4D06 > > isdn switch-type basic-5ess > ! > router ospf 1 > router-id 1.1.1.1 > log-adjacency-changes > area 0 authentication message-digest > area 11 nssa no-redistribution default-information-originate > redistribute eigrp 1 metric 20 subnets > redistribute rip metric 20 subnets > network 150.100.7.1 0.0.0.0 area 0 > r1#sh isdn status > Global ISDN Switchtype = basic-5ess > ISDN BRI0 interface > dsl 0, interface ISDN Switchtype = basic-5ess > Layer 1 Status: > ACTIVE > Layer 2 Status: > TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED > Layer 3 Status: > 0 Active Layer 3 Call(s) > Active dsl 0 CCBs = 0 > The Free Channel Mask: 0x80000003 > Number of L2 Discards = 0, L2 Session ID = 2 > Total Allocated ISDN CCBs = 0 > > > > R2 > interface BRI0 > ip address 150.100.7.2 255.255.255.0 > encapsulation ppp > dialer idle-timeout 60 > dialer map ip 150.100.7.1 name james broadcast 2001 > dialer-group 1 > isdn switch-type basic-5ess > ppp authentication pap > ! > router ospf 1 > router-id 2.2.2.2 > log-adjacency-changes > area 0 authentication message-digest > network 150.100.7.2 0.0.0.0 area 0 > network 150.100.7.0 0.0.0.255 area 0 > network 150.100.32.0 0.0.0.255 area 1 > network 150.100.250.34 0.0.0.0 area 0 > isdn switch-type basic-5ess > ! > > r2#sh isdn status > Global ISDN Switchtype = basic-5ess > ISDN BRI0 interface > dsl 0, interface ISDN Switchtype = basic-5ess > Layer 1 Status: > ACTIVE > Layer 2 Status: > TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED > Layer 3 Status: > 0 Active Layer 3 Call(s) > Active dsl 0 CCBs = 0 > The Free Channel Mask: 0x80000003 > Number of L2 Discards = 0, L2 Session ID = 4 > Total Allocated ISDN CCBs = 0 > > Do I need authentication on that Bri 0 interfaces for OSPF for area 0? > > I might need ip ospf demand circut on both sides or my authentication could > be faulty. > > Any suggestions much appreciated > Randy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64305&t=64221 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
