Slightly OT I had a site once that had an HP LH3 (or something similar) server that had an absolute crap video card. Whenever I wasn't there, performance was poor. Whenever I was on site, performance was good.
It turned out to be the 3D screen saver that someone had configured was killing the server. It affected the process that these people used (probably a driver problem or something) so I changed the screen saver to a marquee and everything was fine. Don't know if this is relevant to you but worth a look. Symon -----Original Message----- From: Steve [mailto:[EMAIL PROTECTED] Sent: 04 March 2003 01:00 To: [EMAIL PROTECTED] Subject: Re: Networking problem [7:64012] Do use half duplex also what are you doing when its slow specifically? is the server slow accessing computers on the network and taking files or is it slow accessing the internet? ""Orlando, Jr. Palomar"" wrote in message news:[EMAIL PROTECTED] > Adeboye Onifade wrote: > > Server. > > The > > server is a Pentium 3, 128MB changed to 256, it's also on full > > duplex on the switch/ hubs etc.... could anyone advise on how to > > make the server more efficient! > > You can't configure full-duplex when connecting to a hub. Probably explains > the problems you're having. ============================================= This email has been content filtered and subject to spam filtering. If you consider this email is unsolicited please forward the email to [EMAIL PROTECTED] and request that the sender's domain be blocked from sending any further emails. ============================================= Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64326&t=64012 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
