Does anyone know why the Giant counter below shows "-" as opposed to a
numerical counter? Cisco Works is showing the trunk as suffering from a high
number of oversize errors but the port counters don't back this up. I've
tried a clear counters but this has made no difference.
Sessions_A (enable) sh po 1/1
Port Name Status Vlan Level Duplex Speed Type
----- ------------------ ---------- ---------- ------ ------ ----- ---------
---
1/1 to_cab_AA connected trunk normal full 1000
1000BaseSX
Port Trap IfIndex
----- -------- -------
1/1 disabled 3
Port Broadcast-Limit Broadcast-Drop
-------- --------------- --------------
1/1 65.00 % 0
Port Send FlowControl Receive FlowControl RxPause TxPause Unsupported
admin oper admin oper opcodes
----- -------- -------- -------- -------- ------- ------- -----------
1/1 on on on on 0 0 0
Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize
----- ---------- ---------- ---------- ---------- ---------
1/1 0 0 0 0 0
Port Single-Col Multi-Coll Late-Coll Excess-Col Carri-Sen Runts Giants
----- ---------- ---------- ---------- ---------- --------- --------- ------
---
1/1 0 0 0 0 0
0 -
Many thanks in advance.
Tim
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64355&t=64355
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
