Hey all,
I'm seeing some weird behavior on a pair of 6509's that I can't
explain. These two 6509/MSFC's are on an ethernet segment with two
other routers that are the DR and BDR. The DR and BDR have formed
adjacencies with the 6509s and with each other, the weird thing is that
the 6509's are constantly trying to form adjacencies with each other.
My understanding of OSPF was that routers on broadcast media only form
adjacencies with the DR/BDR. Is it within the operation of the protocol
that non-DR/BDR's will just continually try to form adjacencies with
each other and fail from the 2-way state? These two 6509's do just
that...They sit in 2-way state until the timeout expires, then they
fall-back to a down state, then start all over again. Any idea's on
what's going on? Configs are very basic, no tricky stuff. "debug ip
ospf adjacencies/events" show's nothing out of the ordinary.
Confused,
Kelly
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64437&t=64437
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
