In the following secnaryo should there be any problems for the hosts on the inside of router1 to connect to the hosts on the otherside of the VPN tunnel
inside network----router1----router2----internet inside of router1 are RFC1918 addresses are used router1 is doing NAT in between the router is a kind of DNZ, and public ip addresses are used router2 makes a IPsec tunnel to an vpn concentrator for some of the traffic to pass through will I have problems with this setup, It has not worked yet, and any comments would be welcome. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64731&t=64731 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]