Yes. And you will find below the output of the show route on the LS100: LS100#show route Destination Type Primary VPI Secondary VPI 4700010001 0001000100 0100001110 1110111000 NSAP * 0 10 0 200 4700020002 0002000200 0200022220 2220222000 NSAP * 2 10 2 200
LS100# ----- Original Message ----- From: "Tony Schaffran" To: "John Tafasi" ; "Cisco Group Study" ; "ccielab" Sent: Friday, March 07, 2003 1:11 PM Subject: Re: Problem with Lightstream 100, SVC > My first question would be, is your LS100 configured for routing NSAP > addresses? > > > > Tony Schaffran > Network Analyst > CCIE #11071 > CCNP, CCNA, CCDA, > NNCSS, NNCDS, CNE, MCSE > > www.cconlinelabs.com > "Your #1 choice for Cisco rack rentals." > > > ----- Original Message ----- > From: "John Tafasi" > To: "Cisco Group Study" ; "ccielab" > > Sent: Friday, March 07, 2003 11:37 AM > Subject: Problem with Lightstream 100, SVC > > > > Hi Group, > > > > I have two atm routers that are connected to a Cisco Lightstream 100 atm > > switch. I am trying to cause r6 to call r9 but the call does not succeed. > I > > have configured svc routes on the switch and configured the two routers to > > use svc to reach each other. Below you will find the necessary > > configurations and output of the debug commands. From the output of the > > debug commands on the routers I can see that the routers could not > register > > their addresses with the arp server. > > > > > > A > > > > r6#show run > > Building configuration... > > > > Current configuration : 883 bytes > > ! > > version 12.2 > > service timestamps debug uptime > > service timestamps log uptime > > no service password-encryption > > ! > > hostname r6 > > ! > > ! > > ip subnet-zero > > ! > > ip ssh time-out 120 > > ip ssh authentication-retries 3 > > ! > > ! > > ! > > ! > > interface Ethernet0 > > no ip address > > shutdown > > media-type 10BaseT > > ! > > interface Ethernet1 > > no ip address > > shutdown > > media-type 10BaseT > > ! > > interface Serial0 > > no ip address > > shutdown > > ! > > interface Serial1 > > no ip address > > shutdown > > ! > > interface ATM0 > > no ip address > > atm pvc 1 0 5 qsaal > > atm pvc 2 0 16 ilmi > > no atm ilmi-keepalive > > ! > > interface ATM0.1 multipoint > > ip address 138.10.168.1 255.255.255.0 > > atm nsap-address 47.000100010001000100010001.111011101110.00 > > atm arp-server nsap 47.000200020002000200020002.222022202220.00 > > ! > > ! > > ip classless > > no ip http server > > ip pim bidir-enable > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > line con 0 > > exec-timeout 0 0 > > logging synchronous > > line aux 0 > > line vty 0 4 > > login > > ! > > end > > > > r6# > > > > ======================= > > > > r9>ena > > r9#show run > > Building configuration... > > > > Current configuration : 643 bytes > > ! > > version 12.2 > > service timestamps debug uptime > > service timestamps log uptime > > no service password-encryption > > ! > > hostname r9 > > ! > > ! > > ip subnet-zero > > ! > > ip ssh time-out 120 > > ip ssh authentication-retries 3 > > ! > > ! > > ! > > ! > > interface Ethernet0 > > no ip address > > shutdown > > ! > > interface Ethernet1 > > no ip address > > shutdown > > ! > > interface ATM0 > > no ip address > > atm pvc 1 0 5 qsaal > > atm pvc 2 0 16 ilmi > > no atm ilmi-keepalive > > ! > > interface ATM0.1 multipoint > > ip address 138.108.168.2 255.255.255.0 > > atm nsap-address 47.000200020002000200020002.222022202220.00 > > atm arp-server self > > ! > > ! > > ip classless > > no ip http server > > ip pim bidir-enable > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > ! > > line con 0 > > line aux 0 > > line vty 0 4 > > ! > > end > > > > r9# > > > > > > =================== > > > > > > LS100#show pvc 0 > > Bandwidth Available (Forward/Backward/Line Rate): 0.0 / 0.0 / 155.0 > Mbps > > Existing connections : 0 (Uni), 2 (Bi), 0 (Multipoint), 2 > > (Gateway) > > LowLine LowVPI LowVCI HiLine HiVPI HiVCI TrfType CONNECTION > > 0 0 5 16 0 2 UBR-BE Gateway > > 0 0 16 16 0 3 UBR-BE Gateway > > 0 0 32 2 0 32 UBR-BE Bi > > 0 0 100 2 0 101 VBR-GS Bi > > > > LS100# > > LS100# > > LS100# > > LS100# > > LS100# > > LS100#show pvc 0 > > Bandwidth Available (Forward/Backward/Line Rate): 0.0 / 0.0 / 155.0 > Mbps > > Existing connections : 0 (Uni), 2 (Bi), 0 (Multipoint), 2 > > (Gateway) > > LowLine LowVPI LowVCI HiLine HiVPI HiVCI TrfType CONNECTION > > 0 0 5 16 0 2 UBR-BE Gateway > > 0 0 16 16 0 3 UBR-BE Gateway > > 0 0 32 2 0 32 UBR-BE Bi > > 0 0 100 2 0 101 VBR-GS Bi > > > > LS100#show pvc 2 > > Bandwidth Available (Forward/Backward/Line Rate): 0.0 / 0.0 / 155.0 > Mbps > > Existing connections : 0 (Uni), 2 (Bi), 0 (Multipoint), 2 > > (Gateway) > > LowLine LowVPI LowVCI HiLine HiVPI HiVCI TrfType CONNECTION > > 2 0 5 16 0 2 UBR-BE Gateway > > 2 0 16 16 0 3 UBR-BE Gateway > > 2 0 32 0 0 32 UBR-BE Bi > > 2 0 101 0 0 100 VBR-GS Bi > > > > LS100#show route > > Destination Type Primary VPI Secondary > > VPI > > 4700010001 0001000100 0100001110 1110111000 NSAP * 0 10 0 > > 200 > > 4700020002 0002000200 0200022220 2220222000 NSAP * 2 10 2 > > 200 > > > > LS100#show line > > Line 0 :(GOOD) > > Line 1 :(NA) > > Line 2 :(GOOD) > > Line 3 :(NA) > > Line 4 :(Loss of Signal) > > Line 5 :(NA) > > Line 6 :(Loss of Signal) > > Line 7 :(NA) > > Line 8 :(NA) > > Line 9 :(NA) > > Line 10:(NA) > > Line 11:(NA) > > Line 12:(NA) > > Line 13:(NA) > > Line 14:(NA) > > Line 15:(NA) > > > > LS100# > > > > > > ====================== > > > > Output of debug atm sig-all on r6 > > > > r6# > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - alloc_connection_id > E > > 00:14:02: > > ATMAPI: (c->s): SETUPv2 ci: 0xE mp: 0 ei: 0xFFFFFFFF > > 00:14:02: ATMSIG: Called len 20 > > 00:14:02: ATMSIG: Calling len 20 > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) build Setup msg, Null(U0) > > state > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - from sig-client > > ATM_OWNER_SMAP > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Req Setup > in > > Null(U0) > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Output Setup > > msg(XferAndTx), Null(U0) state > > 00:14:02: ATMSIG: Called Party Addr: > > 47.000200020002000200020002.222022202220.00 > > r6# > > 00:14:02: ATMSIG: Calling Party Addr: > > 47.000100010001000100010001.111011101110.00 > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Null(U0) -> Call > > Initiated(U1) > > 00:14:02: E164 NOT Converted > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Rcvd > Release > > Complete in Call Initiated(U1) > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16)cause = Invalid, location > = > > User > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Call Initiated(U1) -> > > Null(U0) > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) API - notifying Release > > Complete event to client ATM0.1 > > 00:14:02: > > ATMAPI: (c > r6# > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - alloc_connection_id > F > > 00:15:02: > > ATMAPI: (c->s): SETUPv2 ci: 0xF mp: 0 ei: 0xFFFFFFFF > > 00:15:02: ATMSIG: Called len 20 > > 00:15:02: ATMSIG: Calling len 20 > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) build Setup msg, Null(U0) > > state > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - from sig-client > > ATM_OWNER_SMAP > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Req Setup > in > > Null(U0) > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Output Setup > > msg(XferAndTx), Null(U0) state > > 00:15:02: ATMSIG: Called Party Addr: > > 47.000200020002000200020002.222022202220.00 > > r6# > > 00:15:02: ATMSIG: Calling Party Addr: > > 47.000100010001000100010001.111011101110.00 > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Null(U0) -> Call > > Initiated(U1) > > 00:15:02: E164 NOT Converted > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Rcvd > Release > > Complete in Call Initiated(U1) > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17)cause = Invalid, location > = > > User > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Call Initiated(U1) -> > > Null(U0) > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) API - notifying Release > > Complete event to client ATM0.1 > > 00:15:02: > > ATMAPI: (c > r6# > > > > ============== > > > > Output of debug atm sig-all on r9 > > > > > > r6# > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - alloc_connection_id > E > > 00:14:02: > > ATMAPI: (c->s): SETUPv2 ci: 0xE mp: 0 ei: 0xFFFFFFFF > > 00:14:02: ATMSIG: Called len 20 > > 00:14:02: ATMSIG: Calling len 20 > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) build Setup msg, Null(U0) > > state > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - from sig-client > > ATM_OWNER_SMAP > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Req Setup > in > > Null(U0) > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Output Setup > > msg(XferAndTx), Null(U0) state > > 00:14:02: ATMSIG: Called Party Addr: > > 47.000200020002000200020002.222022202220.00 > > r6# > > 00:14:02: ATMSIG: Calling Party Addr: > > 47.000100010001000100010001.111011101110.00 > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Null(U0) -> Call > > Initiated(U1) > > 00:14:02: E164 NOT Converted > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Rcvd > Release > > Complete in Call Initiated(U1) > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16)cause = Invalid, location > = > > User > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Call Initiated(U1) -> > > Null(U0) > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) API - notifying Release > > Complete event to client ATM0.1 > > 00:14:02: > > ATMAPI: (c > r6# > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - alloc_connection_id > F > > 00:15:02: > > ATMAPI: (c->s): SETUPv2 ci: 0xF mp: 0 ei: 0xFFFFFFFF > > 00:15:02: ATMSIG: Called len 20 > > 00:15:02: ATMSIG: Calling len 20 > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) build Setup msg, Null(U0) > > state > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - from sig-client > > ATM_OWNER_SMAP > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Req Setup > in > > Null(U0) > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Output Setup > > msg(XferAndTx), Null(U0) state > > 00:15:02: ATMSIG: Called Party Addr: > > 47.000200020002000200020002.222022202220.00 > > r6# > > 00:15:02: ATMSIG: Calling Party Addr: > > 47.000100010001000100010001.111011101110.00 > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Null(U0) -> Call > > Initiated(U1) > > 00:15:02: E164 NOT Converted > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Rcvd > Release > > Complete in Call Initiated(U1) > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17)cause = Invalid, location > = > > User > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Call Initiated(U1) -> > > Null(U0) > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) API - notifying Release > > Complete event to client ATM0.1 > > 00:15:02: > > ATMAPI: (c > r6# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64788&t=64788 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
