Im trying to redirect telnet traffic from the pix to my Cisco 2511 terminal server so I can access the devices over the internet. I checked the previous post and tried to configure the Pix. However the traffic gets denied according to my syslog server.
Any help will be appreciated. JB PC---------INTERNET--------------CABLE/MODEM------------PIX501---------- ---HUB---------TERMINAL SERVER PIX501(config)# sh config : Saved : PIX Version 6.1(4) nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password 2KFQnbNIdI.2KYOU encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname PIX501 domain-name ciscopix.com fixup protocol ftp 21 fixup protocol http 80 fixup protocol h323 1720 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol sip 5060 fixup protocol skinny 2000 names access-list inbound permit icmp any any access-list 101 permit tcp any host 122.249.200.190 eq telnet pager lines 24 logging on logging timestamp logging trap notifications logging host inside 192.168.1.20 interface ethernet0 10baset interface ethernet1 10full mtu outside 1500 mtu inside 1500 ip address outside dhcp setroute ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm pdm location 192.168.1.5 255.255.255.255 inside pdm location 192.168.1.20 255.255.255.255 inside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 122.249.200.190 telnet 192.168.1.5 telnet netmask 255.255.255.255 0 0 route outside 0.0.0.0 0.0.0.0 12.249.200.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable no sysopt route dnat telnet timeout 5 ssh timeout 5 dhcpd lease 3600 dhcpd ping_timeout 750 terminal width 100 Cryptochecksum:69c02ec0dda407600fb27cb80979fcad PIX501(config)# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64764&t=64764 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
