Hi All, I've been trying to work on this particular ATM lab and unable to make the routers connect to each other via a LS100 LightStream Switch!! Could anyone with help me to solve this problem? Below is the configurartion, debug output of the three ATM routers and the LS100 switch:
Here are the configuration of the 3 ATM routers connect to slot 0, 1, 2 of the LS100: RouterA# show run ! interface ATM5/0 no ip address atm pvc 1 0 5 qsaal no atm ilmi-keepalive ! interface ATM5/0.2 multipoint ip address 138.108.168.1 255.255.255.0 atm nsap-address 47.000000000000000000000000.000000000001.00 atm arp-server nsap 47.000000000000000000000000.000000000002.00 ! interface Serial6/0 no ip address shutdown serial restart-delay 0 RouterB# show run interface ATM1/0 no ip address atm pvc 1 0 5 qsaal no atm ilmi-keepalive ! interface ATM1/0.2 multipoint ip address 138.108.168.2 255.255.255.0 atm nsap-address 47.000000000000000000000000.000000000002.00 atm arp-server self ! RouterC# ! interface ATM1/0 no ip address atm pvc 1 0 5 qsaal no atm ilmi-keepalive ! interface ATM1/0.1 multipoint ip address 138.108.168.3 255.255.255.0 atm nsap-address 47.000000000000000000000000.000000000003.00 atm arp-server nsap 47.000000000000000000000000.000000000002.00 ! interface FastEthernet2/0 no ip address shutdown duplex half ! LS10# SHOW ROUTE Destination Type Primary VPI Secondary VPI 4700000000 0000000000 0000000000 0000000100 NSAP * 0 - - - 4700000000 0000000000 0000000000 0000000200 NSAP * 2 - - - 4700000000 0000000000 0000000000 0000000300 NSAP * 3 - - - LS10#SHOW ATMSIG Line U/N T303 T308 T309 T310 T313 T316 T317 T322 T398 T399 UNIver VPI 0 Network 4 30 90 10 4 120 60 4 4 14 3.0 0 1 Network 4 30 90 10 4 120 60 4 4 14 3.0 0 2 Network 4 30 90 10 4 120 60 4 4 14 3.0 0 3 Network 4 30 90 10 4 120 60 4 4 14 3.0 0 Debug output from routerA: RouterA#debug atm sig-all routerA#debug atm sig-all ATM Signalling Events debugging is on ATM Signalling Error debugging is on ATM Signalling IE debugging is on ATM Signalling Api debugging is on routerA#ping 138.108.168.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 138.108.168.2, timeout is 2 seconds: 00:42:08: ATMSIG(ATM5/0 0,0 - 0046/00): (vcnum:0) API - alloc_connection_id 2E 00:42:08: ATMAPI: (c->s): SETUPv2 ci: 0x2E mp: 0 ei: 0xFFFFFFFF 00:42:08: ATMSIG: Called len 20 00:42:08: ATMSIG: Calling len 20 00:42:08: ATMSIG(ATM5/0 0,0 - 0046/00): (vcnum:0) build Setup msg, Null(U0) stat e 00:42:08: ATMSIG(ATM5/0 0,0 - 0046/00): (vcnum:0) API - from sig-client ATM_OWNE R_SMAP 00:42:08: ATMSIG(ATM5/0 0,0 - 0046/00): (vcnum:47) Input event : Req Setup in Nu ll(U0) 00:42:08: ATMSIG(ATM5/0 0,0 - 0046/00): (vcnum:47) Output Setup msg(XferAndTx), Null(U0) state 00:42:08: ATMSIG: Called Party Addr: 47.000000000000000000000000.00000000000 2.00 00:42:08: ATMSIG: Calling Party Addr: 47.000000000000000000000000.00000000000 1.00 00:42:08: ATMSIG(ATM5/0 0,0 - 0046/00): (vcnum:47) Null(U0) -> Call Initiated(U1 ) 00:42:08: E164 NOT Converted 00:42:08: ATMSIG(ATM5/0 0,0 - 0046/00): (vcnum:47) Input event : Rcvd Call Proce eding in Call Initiated(U1) 00:42:08: ATMSIG(ATM5/0 0,128 - 0046/00): (vcnum:47) Connection Identifier IE: associated sig = 88 vpi = 0 vci = 128 00:42:08: ATMSIG(ATM5/0 0,128 - 0046/00): (vcnum:47) Call Initiated(U1) -> Outgo ing Call Proceeding(U3).... 00:42:16: ATMSIG(ATM5/0 0,128 - 0046/00): (vcnum:47) Input event : Rcvd Release in Outgoing Call Proceeding(U3) 00:42:16: ATMSIG(ATM5/0 0,128 - 0046/00): (vcnum:47)cause = Invalid, location = User 00:42:16: ATMSIG(ATM5/0 0,128 - 0046/00): (vcnum:47) Outgoing Call Proceeding(U3 ) -> Release Indication(U12) 00:42:16: ATMSIG(ATM5/0 0,128 - 0046/00): (vcnum:47) API - notifying Release eve nt to client ATM5/0.2 00:42:16: ATMAPI: (cs): RELEASE_COMPv2 ci: 0x2E cause: 0x0 00:42:16: ATMSIG(ATM5/0 0,128 - 0046/00): (vcnum:47) API - from sig-client ATM_O WNER_SMAP 00:42:16: ATMSIG(ATM5/0 0,128 - 0046/00): (vcnum:47) Input event : Req Release C omplete in Release Indication(U12) 00:42:16: ATMSIG(ATM5/0 0,128 - 0046/00): (vcnum:47) building cause code - cause = (0x1B)destination out of order, IE_cause = (0x1B)destination out of order, lo cation = User 00:42:16: ATMSIG(ATM5/0 0,128 - 0046/00): (vcnum:47) Output Release Complete msg , Release Indication(U12) state 00:42:16: ATMSIG(ATM5/0 0,128 - 0046/00): (vcnum:47) Release Indication(U12) -> Dead 00:42:16: ATMSIG(ATM5/0 0,0 - 0047/00): (vcnum:0) API - alloc_connection_id 2F 00:42:16: ATMAPI: (c->s): SETUPv2 ci: 0x2F mp: 0 ei: 0xFFFFFFFF 00:42:16: ATMSIG: Called len 20 00:42:16: ATMSIG: Calling len 20 00:42:16: ATMSIG(ATM5/0 0,0 - 0047/00): (vcnum:0) build Setup msg, Null(U0) stat e 00:42:16: ATMSIG(ATM5/0 0,0 - 0047/00): (vcnum:0) API - from sig-client ATM_OWNE R_SMAP 00:42:16: ATMSIG(ATM5/0 0,0 - 0047/00): (vcnum:48) Input event : Req Setup in Nu ll(U0) 00:42:16: ATMSIG(ATM5/0 0,0 - 0047/00): (vcnum:48) Output Setup msg(XferAndTx), Null(U0) state 00:42:16: ATMSIG: Called Party Addr: 47.000000000000000000000000.00000000000 2.00 00:42:16: ATMSIG: Calling Party Addr: 47.000000000000000000000000.00000000000 1.00 00:42:16: ATMSIG(ATM5/0 0,0 - 0047/00): (vcnum:48) Null(U0) -> Call Initiated(U1 ) 00:42:16: E164. Success rate is 0 percent (0/5) routerA# NOT Converted 00:42:16: ATMSIG(ATM5/0 0,0 - 0047/00): (vcnum:48) Input event : Rcvd Call Proce eding in Call Initiated(U1) 00:42:16: ATMSIG(ATM5/0 0,129 - 0047/00): (vcnum:48) Connection Identifier IE: associated sig = 88 vpi = 0 vci = 129 00:42:16: ATMSIG(ATM5/0 0,129 - 0047/00): (vcnum:48) Call Initiated(U1) -> Outgo ing Call Proceeding(U3) 00:42:16: ATMSIG(ATM5/0 0,129 - 0047/00): (vcnum:48) Input event : Rcvd Release in Outgoing Call Proceeding(U3) 00:42:16: ATMSIG(ATM5/0 0,129 - 0047/00): (vcnum:48)cause = Invalid, location = User 00:42:16: ATMSIG(ATM5/0 0,129 - 0047/00): (vcnum:48) Outgoing Call Proceeding(U3 ) -> Release Indication(U12) 00:42:16: ATMSIG(ATM5/0 0,129 - 0047/00): (vcnum:48) API - notifying Release eve nt to client ATM5/0.2 00:42:16: ATMAPI: (cs): RELEASE_COMPv2 ci: 0x2F cause: 0x0 00:42:16: ATMSIG(ATM5/0 0,129 - 0047/00): (vcnum:48) API - from sig-client ATM_O WNER_SMAP 00:42:16: ATMSIG(ATM5/0 0,129 - 0047/00): (vcnum:48) Input event : Req Release C omplete in Release Indication(U12) 00:42:16: ATMSIG(ATM5/0 0,129 - 0047/00): (vcnum:48) building cause code - cause = (0x1B)destination out of order, IE_cause = (0x1B)destination out of order, lo cation = User 00:42:16: ATMSIG(ATM5/0 0,129 - 0047/00): (vcnum:48) Output Release Complete msg , Release Indication(U12) state 00:42:16: ATMSIG(ATM5/0 0,129 - 0047/00): (vcnum:48) Release Indication(U12) -> Dead THE OTHER 2 ROUTER B AND C GAVE THE SAME DEBUG OUTPUT!!! Thank you all in advance. Xy Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65026&t=65026 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
