Dennis Peterson írta: Thanks for the answer! > Berényi Attila wrote: > >> Hi there, >> >> I have this annoying problem, and I don't know what to do. I've tried to >> set up a mailfiltering system with postfix, amavis, spamassassin and >> clamav, and the first three is working great, but if I enable the virus >> scanning in amavis, postfix throws the mail away beacuse it couldn't >> connect to clamav's local soket. >> >> > > Print the output of the clamconf command. Hide any passwords (proxy...) > mordor:/etc/amavis# clamconf /etc/clamav/clamd.conf: clamd directives ----------------- LogFile = "/var/log/clamav/clamd.log" LogFileUnlock = no LogFileMaxSize = 1048576 LogTime = yes LogClean = no LogVerbose = yes LogSyslog = no LogFacility = "LOG_LOCAL6" PidFile = "/var/run/clamav/clamd.pid" TemporaryDirectory not set ScanPE = yes ScanELF = yes DetectBrokenExecutables = no ScanMail = yes MailFollowURLs = no MailMaxRecursion = 64 PhishingSignatures = yes AlgorithmicDetection = yes ScanHTML = yes ScanOLE2 = yes ScanPDF = no ScanArchive = yes ArchiveMaxFileSize = 10485760 ArchiveMaxRecursion = 8 ArchiveMaxFiles = 1000 ArchiveMaxCompressionRatio = 250 ArchiveLimitMemoryUsage = no ArchiveBlockEncrypted = no ArchiveBlockMax = no DatabaseDirectory = "/var/lib/clamav" TCPAddr not set TCPSocket not set LocalSocket = "/var/run/clamav/clamd.ctl" MaxConnectionQueueLength = 15 StreamMaxLength = 10485760 StreamMinPort = 1024 StreamMaxPort = 2048 MaxThreads = 10 ReadTimeout = 120 IdleTimeout = 30 MaxDirectoryRecursion = 15 FollowDirectorySymlinks = no FollowFileSymlinks = no ExitOnOOM = no Foreground = no Debug = yes LeaveTemporaryFiles = no FixStaleSocket = yes User not set AllowSupplementaryGroups = no SelfCheck = 1800 VirusEvent not set NodalCoreAcceleration = no ClamukoScanOnAccess not set ClamukoScanOnOpen not set ClamukoScanOnClose not set ClamukoScanOnExec not set ClamukoIncludePath not set ClamukoExcludePath not set ClamukoMaxFileSize = 5242880
/etc/clamav/freshclam.conf: clamd and freshclam directives ----------------- [common] LogVerbose = no LogSyslog = no LogFacility = "LOG_LOCAL6" PidFile = "/var/run/clamav/freshclam.pid" DatabaseDirectory = "/var/lib/clamav/" Foreground = no Debug = no AllowSupplementaryGroups = no [clamd] LogFile not set LogFileUnlock = no LogFileMaxSize = 0 LogTime = no LogClean = no TemporaryDirectory not set ScanPE = yes ScanELF = yes DetectBrokenExecutables = no ScanMail = yes MailFollowURLs = no MailMaxRecursion = 64 PhishingSignatures = yes AlgorithmicDetection = yes ScanHTML = yes ScanOLE2 = yes ScanPDF = no ScanArchive = yes ArchiveMaxFileSize = 10485760 ArchiveMaxRecursion = 8 ArchiveMaxFiles = 1000 ArchiveMaxCompressionRatio = 250 ArchiveLimitMemoryUsage = no ArchiveBlockEncrypted = no ArchiveBlockMax = no TCPAddr not set TCPSocket not set LocalSocket not set MaxConnectionQueueLength = 15 StreamMaxLength = 10485760 StreamMinPort = 1024 StreamMaxPort = 2048 MaxThreads = 10 ReadTimeout = 120 IdleTimeout = 30 MaxDirectoryRecursion = 15 FollowDirectorySymlinks = no FollowFileSymlinks = no ExitOnOOM = no LeaveTemporaryFiles = no FixStaleSocket = no User not set SelfCheck = 1800 VirusEvent not set NodalCoreAcceleration = no ClamukoScanOnAccess not set ClamukoScanOnOpen not set ClamukoScanOnClose not set ClamukoScanOnExec not set ClamukoIncludePath not set ClamukoExcludePath not set ClamukoMaxFileSize = 5242880 [freshclam] DatabaseOwner = "clamav" Checks = 24 UpdateLogFile = "/var/log/clamav/freshclam.log" DNSDatabaseInfo = "current.cvd.clamav.net" DatabaseMirror = "db.local.clamav.net" MaxAttempts = 5 ScriptedUpdates = yes HTTPProxyServer not set HTTPProxyPort not set HTTPProxyUsername not set HTTPProxyPassword not set HTTPUserAgent not set NotifyClamd not set OnUpdateExecute not set OnErrorExecute not set OnOutdatedExecute not set LocalIPAddress not set ConnectTimeout = 30 ReceiveTimeout = 30 > There is no clamd.ctl socket in /var/run/clamav and that suggests a > problem with the clamd.conf file. > > Your clamd process is running as user root. Probably not what you want. > You're right, but I thought I'll change the uid after this problem is solved. > Also, when looking at the process table you can eliminate the "grep" > command from the output this way: > > Instead of: > # ps aux |grep clamd > > use: > # ps aux |grep [c]lamd > > The square brackets are your friend. > > dp > > _______________________________________________ > Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net > http://lurker.clamav.net/list/clamav-users.html > > Thanks again, Attila _______________________________________________ Help us build a comprehensive ClamAV guide: visit http://wiki.clamav.net http://lurker.clamav.net/list/clamav-users.html
