On Tue, 2014-07-22 at 13:53 +0100, Anthony DIckinson wrote: > On 22/07/14 03:47, Chris wrote: > > On Sun, 2014-07-20 at 12:52 -0400, Scott Kitterman wrote: > >> On Sunday, July 20, 2014 07:27:25 Chris wrote: > >>> On Sun, 2014-07-20 at 13:32 +0200, Matus UHLAR - fantomas wrote: > >>>> On 19.07.14 21:38, Chris wrote: > >>>>> Finally I'm about finished with setting up my Ubuntu 14.04 system and > >>>>> getting everything setup the way it was in the old Mandriva system. I > >>>>> have both SA and ClamAV running now but I'm missing a module, > >>>>> File::Scan::ClamAV to interface with SA. Have tried multiple times to > >>>>> install via CPAN, I'm posted the output at pastebin - > >>>>> http://pastebin.com/bdurgL6X > >>>>> > >>>>> Any ideas anyone? ClamAV has been installed via the Ubuntu software > >>>>> installer if it makes a difference. > >>>> why not using ClamAV with your MTA directly? > >>> Good morning Matus, I have postfix installed and running, however, the > >>> only mail that goes through it are the outputs of cronjobs sent to me > >>> and the forwarding of spam to the address s...@uce.gov . That is > >>> probably overkill but I installed it so long ago on the old machine that > >>> it was just 2nd nature to install it again. The mail from my ISP comes > >>> in via Fetchmail > Procmail and is run through SA prior to getting > >>> tossed to my inbox. > >> I use clamsmtp (also from the Ubuntu package archive) with postfix, but I > >> suspect you could configure it as a transparent proxy between fetchmail and > >> procmail. Then the virus scanning would be handled further upstream. > >> > >> Scott K > > I looked at this Scott but I don't think I'm techno-savy enough to try > > it. Any other ideas on how to install this module? After looking at the > > 't' folder in the source pkg and the errors it looks like it's looking > > for something it can't find but then again I'm not a perl programmer so > > I can't be positive. > > > > Thanks > > Chris > > > > Chris, > > Looks like the tests for this module are out of date or not 100% > accurate. You can get the tests to complete by fudging.... Warning: Hack > alert!!! > > > #step 1 > sudo cpan > install File::Scan::ClamAV > (this will fail) > look File::Scan::ClamAV > (this puts you in the build directory for this module within cpan) e.g.: > > cpan[2]> look File::Scan::ClamAV > Running look for module 'File::Scan::ClamAV' > > Trying to open a subshell in the build directory... > Working directory is /root/.cpan/build/File-Scan-ClamAV-1.91-O_dSGE > xxxx@xxxx:.cpan/build/File-Scan-ClamAV-1.91-O_dSGE# > > #step 2 > cd t > (go into the test directory) > (in mkconf.pl change): > my $dir = cwd; > to > my $dir = '/tmp/; > > #step 3 > In 01ping.t, 02reload.t, 03quit.t, 04scan.t and 05streamscan.t files: > 1) change all references to 'clamsock' to '/tmp/clamsock' (should be 3 > places in each file: in the loop, during File::Scan::ClamAV > instantiation and unlink) > 2) change the for loop count from 10 to 60 (as clamd takes a while to > load) so, > for (1..10) > to > for (1..60) > > #step 4 > cd .. > (back to the root build dir) > > # step 5 > (run make test to run the test suite) e.g.: > > xxxx@xxxx:.cpan/build/File-Scan-ClamAV-1.91-O_dSGE# make test > PERL_DL_NONLAZY=1 CLAMD_PATH=/usr/sbin /usr/bin/perl > "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', > ' blib/arch')" t/*.t > t/00basic.t ....... ok > t/01ping.t ........ ok > t/02reload.t ...... ok > t/03quit.t ........ ok > t/04scan.t ........ ok > t/05streamscan.t .. ok > t/pod-coverage.t .. skipped: Test::Pod::Coverage 1.00 required for > testing POD coverage > t/pod.t ........... skipped: Test::Pod 1.00 required for testing POD > All tests successful. > Files=8, Tests=27, 187 wallclock secs ( 0.09 usr 0.04 sys + 174.55 > cusr 4.58 csys = 179.26 CPU) > Result: PASS > xxxx@xxxx:.cpan/build/File-Scan-ClamAV-1.91-O_dSGE# > > # step 6 > (run make install to install the modules) > make install > > # step 7 > exit > quit > > Hope this helps, > > Ant > _______________________________________________ > Help us build a comprehensive ClamAV guide: > https://github.com/vrtadmin/clamav-faq > http://www.clamav.net/support/ml
Hmm, made the changes as noted: root@localhost:~/.cpan/build/File-Scan-ClamAV-1.91-N3ENzf# make test PERL_DL_NONLAZY=1 CLAMD_PATH=/usr/sbin /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00basic.t ....... ok t/01ping.t ........ ERROR: LOCAL: Socket file /clamsock could not be bound: Permission denied t/01ping.t ........ 1/3 # Failed test 2 in t/01ping.t at line 26 # t/01ping.t line 26 is: ok($av->ping); t/01ping.t ........ Failed 1/3 subtests t/02reload.t ...... ERROR: LOCAL: Socket file /clamsock could not be bound: Permission denied ^Cmake: *** [test_dynamic] Interrupt root@localhost:~/.cpan/build/File-Scan-ClamAV-1.91-N3ENzf# make test PERL_DL_NONLAZY=1 CLAMD_PATH=/usr/sbin /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00basic.t ....... ok t/01ping.t ........ ERROR: LOCAL: Socket file /clamsock could not be bound: Permission denied t/01ping.t ........ 1/3 # Failed test 2 in t/01ping.t at line 26 # t/01ping.t line 26 is: ok($av->ping); t/01ping.t ........ Failed 1/3 subtests t/02reload.t ...... ERROR: LOCAL: Socket file /clamsock could not be bound: Permission denied t/02reload.t ...... 1/3 # Failed test 2 in t/02reload.t at line 25 # t/02reload.t line 25 is: ok($av->reload); t/02reload.t ...... Failed 1/3 subtests t/03quit.t ........ ERROR: LOCAL: Socket file /clamsock could not be bound: Permission denied t/03quit.t ........ 1/4 # Failed test 2 in t/03quit.t at line 31 # t/03quit.t line 31 is: ok($av->quit); t/03quit.t ........ Failed 1/4 subtests t/04scan.t ........ ERROR: LOCAL: Socket file /clamsock could not be bound: Permission denied t/04scan.t ........ 1/8 # Test 4 got: "" (t/04scan.t at line 36) # Expected: "1" (Didn't detect /home/chris/.cpan/build/File-Scan-ClamAV-1.91-N3ENzf/testfiles/clamavtest) # t/04scan.t line 36 is: ok(exists($results{"$testdir/clamavtest"}), 1, "Didn't detect $testdir/clamavtest"); # Test 5 got: "" (t/04scan.t at line 37) # Expected: "1" (Didn't detect /home/chris/.cpan/build/File-Scan-ClamAV-1.91-N3ENzf/testfiles/clamavtest.zip) # t/04scan.t line 37 is: ok(exists($results{"$testdir/clamavtest.zip"}), 1, "Didn't detect $testdir/clamavtest.zip"); # Test 6 got: "" (t/04scan.t at line 38) # Expected: "1" (Didn't detect /home/chris/.cpan/build/File-Scan-ClamAV-1.91-N3ENzf/testfiles/clamavtest.gz) # t/04scan.t line 38 is: ok(exists($results{"$testdir/clamavtest.gz"}), 1, "Didn't detect $testdir/clamavtest.gz"); t/04scan.t ........ Failed 3/8 subtests t/05streamscan.t .. ERROR: LOCAL: Socket file /clamsock could not be bound: Permission denied t/05streamscan.t .. 1/8 # Test 5 got: <UNDEF> (t/05streamscan.t at line 43) # Expected: "FOUND" # t/05streamscan.t line 43 is: ok($ans, 'FOUND'); # Test 6 got: <UNDEF> (t/05streamscan.t at line 44) # Expected: "ClamAV-Test-Signature" # t/05streamscan.t line 44 is: ok($vir, 'ClamAV-Test-Signature'); t/05streamscan.t .. Failed 2/8 subtests t/pod-coverage.t .. ok t/pod.t ........... ok Test Summary Report ------------------- t/01ping.t (Wstat: 0 Tests: 3 Failed: 1) Failed test: 2 t/02reload.t (Wstat: 0 Tests: 3 Failed: 1) Failed test: 2 t/03quit.t (Wstat: 0 Tests: 4 Failed: 1) Failed test: 2 t/04scan.t (Wstat: 0 Tests: 8 Failed: 3) Failed tests: 4-6 t/05streamscan.t (Wstat: 0 Tests: 8 Failed: 2) Failed tests: 5-6 Files=8, Tests=29, 301 wallclock secs ( 0.04 usr 0.01 sys + 56.64 cusr 1.95 csys = 58.64 CPU) Result: FAIL Failed 5/8 test programs. 8/29 subtests failed. make: *** [test_dynamic] Error 255 I have /tmp under: root@localhost:/# cd root root@localhost:/root# ls -l total 8 drwxr-xr-x 2 root root 4096 Jul 15 07:49 Desktop drwxr-xr-x 2 root root 4096 Jul 22 10:22 tmp root@localhost:/root# cd .. root@localhost:/# ls -l total 129 drwxr-xr-x 2 root root 4096 Jul 12 20:32 bin drwxr-xr-x 4 root root 1024 Jul 17 08:22 boot drwxrwxr-x 2 root root 4096 Jul 12 19:52 cdrom drwxr-xr-x 16 root root 4300 Jul 21 22:30 dev drwxr-xr-x 152 root root 12288 Jul 21 22:30 etc -rw-r--r-- 1 root root 4777 Jan 11 2008 GPG.KEY drwxr-xr-x 3 root root 4096 Jul 12 19:53 home lrwxrwxrwx 1 root root 33 Jul 17 08:22 initrd.img -> boot/initrd.img-3.13.0-32-generic lrwxrwxrwx 1 root root 33 Jul 12 20:33 initrd.img.old -> boot/initrd.img-3.13.0-30-generic drwxr-xr-x 23 root root 4096 Jul 12 19:58 lib drwxr-xr-x 2 root root 4096 Apr 16 20:21 lib64 drwx------ 2 root root 16384 Jul 12 19:45 lost+found drwxr-xr-x 3 root root 4096 Jul 12 21:05 media drwxr-xr-x 2 root root 4096 Apr 10 17:12 mnt drwxr-xr-x 7 root root 4096 Jul 16 15:39 nonexisting drwxr-xr-x 2 root root 4096 Apr 16 20:21 opt dr-xr-xr-x 239 root root 0 Jul 20 17:45 proc -rw-r--r-- 1 root root 108 Jul 14 09:13 razor-agent.log drwx------ 21 root root 4096 Jul 22 10:22 root drwxr-xr-x 28 root root 880 Jul 21 07:37 run drwxr-xr-x 2 root root 12288 Jul 12 20:28 sbin drwxr-xr-x 2 root root 4096 Apr 16 20:21 srv dr-xr-xr-x 13 root root 0 Jul 20 17:45 sys drwxrwxrwt 12 root root 20480 Jul 22 10:26 tmp drwxr-xr-x 12 root root 4096 Jul 14 20:50 usr drwxr-xr-x 17 root root 4096 Jul 16 13:37 var lrwxrwxrwx 1 root root 30 Jul 17 08:22 vmlinuz -> boot/vmlinuz-3.13.0-32-generic lrwxrwxrwx 1 root root 30 Jul 12 20:33 vmlinuz.old -> boot/vmlinuz-3.13.0-30-generic -rw-r--r-- 1 root root 2165 Jul 13 14:07 webmin-setup.out and to be sure I made one in my /home/chris folder: drwxrwxr-x 2 chris chris 4096 Jul 22 10:31 tmp So, where did I go wrong? Thanks Chris _______________________________________________ Help us build a comprehensive ClamAV guide: https://github.com/vrtadmin/clamav-faq http://www.clamav.net/support/ml