Hi Eric, Am running Centos 7 64 Bit with the Qmailtoaster system. Usually update through the command line . I have seen the clamav 102-2.elf version update on my system in the webmin control panel and updated through the panel. The freshclam command is running without issue, but when I ran toaststat clamav-freshclam was stopped and unable to be active and run.
My output below. *cat /usr/lib/systemd/system/clamav-freshclam.service* [Unit] Description=ClamAV virus database updater Documentation=man:freshclam(1) man:freshclam.conf(5) https://www.clamav.net/documents # If user wants it run from cron, don't start the daemon. ConditionPathExists=!/etc/cron.d/clamav-update Wants=network-online.target After=network-online.target [Service] ExecStart=/usr/bin/freshclam -d --foreground=true [Install] WantedBy=multi-user.target *cat /etc/freshclam.conf* ## Example config file for freshclam ## Please read the freshclam.conf(5) manual before editing this file. ## # Comment or remove the line below. #Example # Path to the database directory. # WARNING: It must match clamd.conf's directive! # Default: hardcoded (depends on installation options) #DatabaseDirectory /var/lib/clamav # Path to the log file (make sure it has proper permissions) # Default: disabled #UpdateLogFile /var/log/clamav/freshclam.log #UpdateLogFile /var/log/freshclam.log # Maximum size of the log file. # Value of 0 disables the limit. # You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes) # and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes). # in bytes just don't use modifiers. If LogFileMaxSize is enabled, # log rotation (the LogRotate option) will always be enabled. # Default: 1M LogFileMaxSize 2M # Log time with each message. # Default: no LogTime yes # Enable verbose logging. # Default: no LogVerbose yes # Use system logger (can work together with UpdateLogFile). # Default: no #LogSyslog yes # Specify the type of syslog messages - please refer to 'man syslog' # for facility names. # Default: LOG_LOCAL6 #LogFacility LOG_MAIL # Enable log rotation. Always enabled when LogFileMaxSize is enabled. # Default: no LogRotate yes # This option allows you to save the process identifier of the daemon # Default: disabled #PidFile /var/run/freshclam.pid # By default when started freshclam drops privileges and switches to the # "clamav" user. This directive allows you to change the database owner. # Default: clamav (may depend on installation options) #DatabaseOwner clamupdate # Use DNS to verify virus database version. Freshclam uses DNS TXT records # to verify database and software versions. With this directive you can change # the database verification domain. # WARNING: Do not touch it unless you're configuring freshclam to use your # own database verification domain. # Default: current.cvd.clamav.net #DNSDatabaseInfo current.cvd.clamav.net # database.clamav.net is now the primary domain name to be used world-wide. # Now that CloudFlare is being used as our Content Delivery Network (CDN), # this one domain name works world-wide to direct freshclam to the closest # geographic endpoint. # If the old db.XY.clamav.net domains are set, freshclam will automatically # use database.clamav.net instead. DatabaseMirror database.clamav.net # How many attempts to make before giving up. # Default: 3 (per mirror) #MaxAttempts 5 # With this option you can control scripted updates. It's highly recommended # to keep it enabled. # Default: yes #ScriptedUpdates yes # By default freshclam will keep the local databases (.cld) uncompressed to # make their handling faster. With this option you can enable the compression; # the change will take effect with the next database update. # Default: no #CompressLocalDatabase no # With this option you can provide custom sources for database files. # This option can be used multiple times. Support for: # http(s)://, ftp(s)://, or file:// # Default: no custom URLs #DatabaseCustomURL http://myserver.example.com/mysigs.ndb #DatabaseCustomURL https://myserver.example.com/mysigs.ndb #DatabaseCustomURL https://myserver.example.com:4567/whitelist.wdb #DatabaseCustomURL ftp://myserver.example.com/example.ldb #DatabaseCustomURL ftps://myserver.example.com:4567/example.ndb #DatabaseCustomURL file:///mnt/nfs/local.hdb # This option allows you to easily point freshclam to private mirrors. # If PrivateMirror is set, freshclam does not attempt to use DNS # to determine whether its databases are out-of-date, instead it will # use the If-Modified-Since request or directly check the headers of the # remote database files. For each database, freshclam first attempts # to download the CLD file. If that fails, it tries to download the # CVD file. This option overrides DatabaseMirror, DNSDatabaseInfo # and ScriptedUpdates. It can be used multiple times to provide # fall-back mirrors. # Default: disabled #PrivateMirror mirror1.example.com #PrivateMirror mirror2.example.com # Number of database checks per day. # Default: 12 (every two hours) #Checks 24 # Proxy settings # The HTTPProxyServer may be prefixed with [scheme]:// to specify which kind # of proxy is used. # http:// HTTP Proxy. Default when no scheme or proxy type is specified. # https:// HTTPS Proxy. (Added in 7.52.0 for OpenSSL, GnuTLS and NSS) # socks4:// SOCKS4 Proxy. # socks4a:// SOCKS4a Proxy. Proxy resolves URL hostname. # socks5:// SOCKS5 Proxy. # socks5h:// SOCKS5 Proxy. Proxy resolves URL hostname. # Default: disabled #HTTPProxyServer https://proxy.example.com #HTTPProxyPort 1234 #HTTPProxyUsername myusername #HTTPProxyPassword mypass # If your servers are behind a firewall/proxy which applies User-Agent # filtering you can use this option to force the use of a different # User-Agent header. # Default: clamav/version_number #HTTPUserAgent SomeUserAgentIdString # Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful for # multi-homed systems. # Default: Use OS'es default outgoing IP address. #LocalIPAddress aaa.bbb.ccc.ddd # Send the RELOAD command to clamd. # Default: no #NotifyClamd /path/to/clamd.conf # Run command after successful database update. # Default: disabled #OnUpdateExecute command # Run command when database update process fails. # Default: disabled #OnErrorExecute command # Run command when freshclam reports outdated version. # In the command string %v will be replaced by the new version number. # Default: disabled #OnOutdatedExecute command # Don't fork into background. # Default: no #Foreground yes # Enable debug messages in libclamav. # Default: no #Debug yes # Timeout in seconds when connecting to database server. # Default: 30 #ConnectTimeout 60 # Timeout in seconds when reading from database server. # Default: 0 #ReceiveTimeout 1800 # With this option enabled, freshclam will attempt to load new # databases into memory to make sure they are properly handled # by libclamav before replacing the old ones. # Default: yes #TestDatabases yes # This option enables support for Google Safe Browsing. When activated for # the first time, freshclam will download a new database file # (safebrowsing.cvd) which will be automatically loaded by clamd and # clamscan during the next reload, provided that the heuristic phishing # detection is turned on. This database includes information about websites # that may be phishing sites or possible sources of malware. When using this # option, it's mandatory to run freshclam at least every 30 minutes. # Freshclam uses the ClamAV's mirror infrastructure to distribute the # database and its updates but all the contents are provided under Google's # terms of use. # See https://transparencyreport.google.com/safe-browsing/overview # and https://www.clamav.net/documents/safebrowsing for more information. # Default: no #SafeBrowsing yes # This option enables downloading of bytecode.cvd, which includes additional # detection mechanisms and improvements to the ClamAV engine. # Default: yes #Bytecode no # Include an optional signature databases (opt-in). # This option can be used multiple times. #ExtraDatabase dbname1 #ExtraDatabase dbname2 # Exclude a standard signature database (opt-out). # This option can be used multiple times. #ExcludeDatabase dbname1 #ExcludeDatabase dbname2 On Thu, Jul 1, 2021 at 9:54 PM Eric Broch via clamav-users < clamav-users@lists.clamav.net> wrote: > # cat /etc/freshclam.conf > > Show output on list. > On 7/1/2021 2:46 AM, ChandranManikandan via clamav-users wrote: > > Hi Folks, > > I have updated the below packages through the webmin panel. > Jul 01 13:27:50 Updated: clamav-filesystem-0.103.2-2.el7.noarch > Jul 01 13:27:51 Updated: clamav-lib-0.103.2-2.el7.x86_64 > Jul 01 13:27:52 Updated: clamav-update-0.103.2-2.el7.x86_64 > Jul 01 13:27:52 Updated: clamav-0.103.2-2.el7.x86_64 > Jul 01 13:27:52 Updated: clamd-0.103.2-2.el7.x86_64 > > After updating i got the below clamav-freshclam error. > > systemd service: clamav-freshclam: [ FAILED ] > > I have restarted the clamav-freshclam service but still the below message > came. > > ● clamav-freshclam.service - ClamAV virus database updater > Loaded: loaded (/usr/lib/systemd/system/clamav-freshclam.service; > enabled; vendor preset: disabled) > Active: inactive (dead) since Thu 2021-07-01 13:28:11 +08; 1h 8min ago > Condition: start condition failed at Thu 2021-07-01 14:19:49 +08; 17min ago > ConditionPathExists=!/etc/cron.d/clamav-update was not met > Docs: man:freshclam(1) > man:freshclam.conf(5) > https://www.clamav.net/documents > Main PID: 1164 (code=exited, status=0/SUCCESS) > > systemd[1]: Stopped ClamAV virus database > > Appreciate anyone assisting me? > > -- > > > *Regards, Manikandan.C * > > _______________________________________________ > > clamav-users mailing > listclamav-users@lists.clamav.nethttps://lists.clamav.net/mailman/listinfo/clamav-users > > > Help us build a comprehensive ClamAV > guide:https://github.com/vrtadmin/clamav-faq > http://www.clamav.net/contact.html#ml > > > _______________________________________________ > > clamav-users mailing list > clamav-users@lists.clamav.net > https://lists.clamav.net/mailman/listinfo/clamav-users > > > Help us build a comprehensive ClamAV guide: > https://github.com/vrtadmin/clamav-faq > > http://www.clamav.net/contact.html#ml > -- *Regards,Manikandan.C*
_______________________________________________ clamav-users mailing list clamav-users@lists.clamav.net https://lists.clamav.net/mailman/listinfo/clamav-users Help us build a comprehensive ClamAV guide: https://github.com/vrtadmin/clamav-faq http://www.clamav.net/contact.html#ml