Have you configured your switch as a managed device? -----Original Message----- From: Cisco Clean Access Users and Administrators [mailto:[EMAIL PROTECTED] On Behalf Of David Stempien Sent: Thursday, May 08, 2008 4:14 PM To: [email protected] Subject: [CLEANACCESS] L2 OOB Virtual Gateway Configuration Problem
I have exhausted my troubleshooting options for what should be a simple configuration. I am trying to add a new CAS as a L2 OOB Virtual Gateway. I've configured L2 IB Virtual Gateways many times with no problem. It appears the configuration in OOB mode is very similar to the IB. Here's what I've done: - Added CAS to CAM as L2 OOB Virtual Gateway - Under managed subnet, added IP for untrusted VLAN - Configured VLAN Mapping for untrusted -> trusted VLANs DHCP passthrough works just fine. I can do everything on my test host as permitted by my Unauthenticated Role. On my test host, I even have ARP resolution for the managed subnet IP on the CAS. For the life of me, I can't figure out why the agent is not popping up or why web page redirection isn't happening. It's almost as if the CAS is not seeing my host traffic, or maybe it's just ignoring it. I find that hard to accept given my observations in the previous paragraph. Is there something special about the OOB configuration that I may have overlooked? Thanks in advance for any advice! -- Dave Stempien, Network Security Engineer University of Rochester Medical Center Information Systems Division (585) 784-2427
