Josh, thanks very much for the reply. Good to see you had a successful
upgrade, especially since your setup is similar to mine! I'll post how it
went next week.
I have one 3350 (CAS), but my CAM and second CAS are Cisco 3140's (not
really the "appliance" but cisco branded hardware). I suspect I'll have to
switch those to the new hardware next year. I don't look forward to that!
-Mike
On Mon, 18 Aug 2008, Heller, Josh wrote:
Mike,
We upgraded from 4.1.2.1 to 4.1.6 last week. We also have a perfigo
cert on our CAM and verisign certs on our CAS boxes. Other than some
red warning text when logging into the CAM, we have had no issues. We
did also add a new CAS and did add a new verisign cert to that appliance
directly from the CAS's web interface using the SSL option from the
left-hand side navigation menu.
We also ditched our legacy Dell 1850's and installed all new Cisco
3350's which added another interesting element to our upgrade project as
we had to have our old Perfigo license switched to the newer FlexLM
licenses.
Josh Heller
Sr. Network Analyst
Information Technology
Kutztown University
610.683.4930
-----Original Message-----
From: Cisco Clean Access Users and Administrators [mailto:[EMAIL PROTECTED] On
Behalf Of Mike Diggins
Sent: Monday, August 18, 2008 10:43 AM
To: [email protected]
Subject: Upgrading to 4.1.6 - Cert question
Just a question to those who upgraded to 4.1.6 already. I'm confused about
the SSL Certs, although I did update my test system this past weekend
anyway. I see the the CAS no longer has the option to add the SSL cert for
it, presumably I now add all the certs from the CAM. My test environment
uses the "perfigo" cert on both the CAM and CAS. Everything seems to work
after upgrading there.
My production environment has the perfigo cert on the CAM, and a Verisign
cert. on each of my two CAS's. After upgrading, assuming I simply run the
upgrade script, will I be left with a functioning system? In other words,
will the upgrade process automatically pull my two Verisign certs from
each CAS to the CAM?
Note, I'm upgrading from 4.1.2.
-Mike
