I replaced my CAM and CASes I did a back on my CAM
Installed 4.1.6 on the Cisco NAC Appliances just like it was the old ones same ip addresses Put all on a 3750 so I have routing - plugged my laptop in and uploaded the backup Did a restore and everything went smoothly. It was time to get new ssl certs so I did not have to go through putting the old ones on. I did have to save out hardware and not go with high availability so I could test the new version once it comes out Feel free to contact me off list if you have any questions todd Todd Joyce Network Engineering Team Lead Radford University [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> (540) 831-7777 Keep your boots and ChapStick and ice hotels. Give me shorts and sandals and a thirty-blocker. Temperance Brennan - Monday Mourning From: Cisco Clean Access Users and Administrators [mailto:[EMAIL PROTECTED] On Behalf Of Mike King Sent: Tuesday, August 26, 2008 7:04 PM To: [email protected] Subject: Re: Easiest way to replace CAS hardware Can you return the server? I only ask, because the next revision of CCA will only run on Cisco Servers. As to the exact proceedure for swapping a CAS, I'll leave that to someone that has done it. On Tue, Aug 26, 2008 at 10:32 AM, Mike Linval <[EMAIL PROTECTED]> wrote: We run our CAM/CAS on our own hardware. We recently purchased a new server for the CAS and I am wondering what is the fastest way to replace the existing CAS with the new hardware? Mike Linval College of St. Scholastica Duluth, MN [EMAIL PROTECTED]
