On Feb 2, 2013, at 7:45 AM, jennifer and kirk terrell wrote:
Hello,
I wanted to check somethings before constructing a patch, which I've
attached, so here goes
3.2 Binutils-2.21 is not available. There is a 2.21.1a package
that I did not try, I went with 2.22.
I found that uClibc-0.9.31 and 0.9.32 were not compatible with
binutils-2.22.
6.4 None is not a good setting for --with-fpu
when compiling gcc I get the following error "Unknown fpu used in
--with-fpu=none"
6.10 If --with-float is soft one shouldn't use --with-fpu
See 6.4
6.11 uClibc-0.9.33 does not need to be patched for use with
binutils-2.22.
If an additional patch of the config file is not done I get
the following error
"make: -gcc: Command not found"
6.12 If --with-float is soft one shouldn't use --with-fpu
7.4 Add make clean prior to copying the config file. Not required
but likely a good practice if one has to restart after a change.
16.1 remove the /sources directory.
Best regards,
Kirk
You seriously need to add a subject to your email. So what is the
subject of this? Is this for the CLFS GIT embedded book?
Sincerely,
William Harrington
_______________________________________________
Clfs-dev mailing list
[email protected]
http://lists.cross-lfs.org/listinfo.cgi/clfs-dev-cross-lfs.org
