On 27/05/13 22:03, bvl wrote:
On Monday 27 May 2013 18:55:22 Martin Ward wrote:
i use stand along isl with the following switches/flags
if you are using stand-alone-isl as opposed to that bundled with cloog, I
have two questions:-
a) shouldnt there be one at 10.12 in the main build ( where ppl use to be )
and could you let us have the options used for this please?
it isn't in the book
isl is built before cloog as it's a dependency
if you are going to do this, see my previous e-mail
b) what are the advantages using stand-alone-isl as opposed to the isl
bundled with cloog (i.e as per the recipe I used originally) ?
probably none really, both packages tend to follow one another with releases
it does seem there is a problem with your symlinks somewhere along the line
regards
I am still stumped. I have deleted the mount point /mnt/clfs, deleted /tools
and /cross-tools symlinks deleted user clfs, group clfs and zeroed
everything and rebuilt the toolchain and I still get the erroneous
/tools/tools
I will rebuild using the linking method ln -svf /mnt/clfs/tools /tools
i think this is where u are going wrong
first you should create a mount point for the new build,
export this location in the environment , typically
export CLFS=/mnt/clfs
both tools and cross tools are directories under that mount point
these are them symlinked to the host's root file system
so its
ln -sv ${CLFS}/tools /
which expands to
ln -svf /mnt/clfs/tools / not as you have above!
and similar with cross-tools
ln -svf /mnt/clfs/cross-tools /
thanks for your help and I look forward to your comments re isl in the main
build.
sincerely
bv
hope that helps
martin
_______________________________________________
Clfs-support mailing list
[email protected]
http://lists.cross-lfs.org/listinfo.cgi/clfs-support-cross-lfs.org
