This issue is discussed and answered on https://sourceforge.net/p/clonezilla/discussion/Clonezilla_live/thread/0a12f366/?limit=50
Steven On 2017/03/04 04:13, Jeff Sadowski wrote: > > I'm using clonezilla-live-2.5.0-25-amd64 > > I pxe boot clonzilla. > I have one machine that is hooked up to 2 networks. > One network is the network I pxe boot clonzilla from the other is a > static assigned network. > When I boot this particular machine it reaches pxelinux and allows me > to choose my clonzilla option. > It loads the kernel and initrd from tftp. > When it starts to boot from the initrd image it tries to get an ip > from eth1 which is on the static network. > So I see a long loop of "no response." > If I unplug the rj45 from the other card it boots fine. > I'd like to pass an option to it to have it use the other card first. > live-netdevice="eth0" doen't seem to make a difference. > > They use that machine often enough I setup another machine in my > office to experiment with. > I had a 4 port network card lying around and the motherboard has a pxe > enabled port. > So I plugged the 4 port card in and pluged one interface on the 4 port > card into another on the 4 port card to simulated the static assigned > network. > The 4 port card shows up as eth0-3. The onboard nic shows as eth4 but > if I pass live-netdevice="eth4" it still tries eth0 and I see the loop > of no response. It looks like it tries eth1 as well but it stops after > a number of eth1 tries and gives me a prompt of (initramfs). > If I unplug the cord from eth0 and eth1 it boots up just fine. > > I added the live-netdevice= to the pxelinux.cfg/default file's append > lines > > label Clonezilla-live Stable 2017-02-20 x64 > menu label Clonezilla Live 2017-02-20 x64 (Stable) > kernel cz170220.x64/live/vmlinuz > append initrd=cz170220.x64/live/initrd.img boot=live union=overlay > username=user hostname=clonezilla config quiet components noswap edd=on > nomodeset nodmraid noeject locales=en_US.UTF-8 k > eyboard-layouts=NONE ocs_live > _run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=788 > toram=filesystem.squashfs ip=dhcp net.ifnames=0 splash i915.blacklist=yes > radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.enable_fbdev=1 > ocs_prerun="dhclient && mount -t nfs <nfs_server>:<nfs_mountpoint>" > fetch=tftp://<tftp_server>/cz160627.x64/live/filesystem.squashfs > label Clonezilla-live Stable 2017-02-20 x64 eth0 option > menu label Clonezilla Live 2017-02-20 x64 (Stable) eth0 option > kernel cz170220.x64/live/vmlinuz > append initrd=cz170220.x64/live/initrd.img boot=live live-netdevice="eth0" > union=overlay username=user hostname=clonezilla config quiet components > noswap edd=on nomodeset nodmraid noeject locales=en_US.UTF-8 k > eyboard-layouts=NONE ocs_live > _run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no vga=788 > toram=filesystem.squashfs ip=dhcp net.ifnames=0 splash i915.blacklist=yes > radeonhd.blacklist=yes nouveau.blacklist=yes vmwgfx.enable_fbdev=1 > ocs_prerun="dhclient && mount -t nfs <nfs_server>:<nfs_mountpoint>" > fetch=tftp://<tftp_server>/cz160627.x64/live/filesystem.squashfs > label Clonezilla-live Stable 2017-02-20 x64 eth1 option > menu label Clonezilla Live 2017-02-20 x64 (Stable) eth1 option > kernel cz170220.x64/live/vmlinuz > append initrd=cz170220.x64/live/initrd.img boot=live live-netdevice="eth1" > union=overlay username=user hostname=clonezilla config quiet components > noswap edd=on nomodeset nodmraid noeject locales=en_US.UTF-8 > keyboard-layouts=NONE ocs_live_run="ocs-live-general" ocs_live_extra_param="" > ocs_live_batch=no vga=788 toram=filesystem.squashfs ip=dhcp net.ifnames=0 > splash i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes > vmwgfx.enable_fbdev=1 ocs_prerun="dhclient && mount -t nfs > <nfs_server>:<nfs_mountpoint>" > fetch=tftp://<tftp_server>/cz160627.x64/live/filesystem.squashfs > label Clonezilla-live Stable 2017-02-20 x64 eth4 option > menu label Clonezilla Live 2017-02-20 x64 (Stable) eth1 option > kernel cz170220.x64/live/vmlinuz > append initrd=cz170220.x64/live/initrd.img boot=live live-netdevice="eth4" > union=overlay username=user hostname=clonezilla config quiet components > noswap edd=on nomodeset nodmraid noeject locales=en_US.UTF-8 > keyboard-layouts=NONE ocs_live_run="ocs-live-general" ocs_live_extra_param="" > ocs_live_batch=no vga=788 toram=filesystem.squashfs ip=dhcp net.ifnames=0 > splash i915.blacklist=yes radeonhd.blacklist=yes nouveau.blacklist=yes > vmwgfx.enable_fbdev=1 ocs_prerun="dhclient && mount -t nfs > <nfs_server>:<nfs_mountpoint>" > fetch=tftp://<tftp_server>/cz160627.x64/live/filesystem.squashfs > > What is going on. why is it ignoring live-netdevice option? > > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, SlashDot.org! http://sdm.link/slashdot > > > _______________________________________________ > Clonezilla-live mailing list > Clonezilla-live@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/clonezilla-live -- Steven Shiau <steven _at_ stevenshiau org> Public Key Server PGP Key ID: 4096R/47CF935C Fingerprint: 0240 1FEB 695D 7112 62F0 8796 11C1 12DA 47CF 935C ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Clonezilla-live mailing list Clonezilla-live@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/clonezilla-live
