The directory /usr/lib/cloud does not exist on my ubuntu - xen runinng in virtualbox. So how can I launch this script (/usr/lib/cloud/common/scripts/storage/secondary/cloud-install-sys-tmplt -m /mnt/secondary -u http://download.cloud.com/templates/acton/acton-systemvm-02062012.vhd.bz2-h xenserver -s <optional-management-server-secret-key> -F) as mentioned in previous email ?
On Thu, Nov 15, 2012 at 3:29 PM, Rohit Yadav <rohit.ya...@citrix.com> wrote: > > On 15-Nov-2012, at 7:12 PM, Charles Moulliard <ch0...@gmail.com> wrote: > > > As of ubuntu-11 is configured use xen, > > > > "As of Ubuntu 11.10 (Oneiric), the default kernel included in Ubuntu can > be > > used directly with the Xen hypervisor as the management (or control) > domain > > (Dom0 or Domain0 in Xen terminology). " > > > > why don't you create an image using it ? > > Yes, I'm using this only. apt-get install xen-hypervisor and you're done. > To use xen, one just need to select the kernel with xen during booting on > grub. > If you're keep, hack ~/.bash_history from the DevCloud image, the history > will tell you what was performed to create devcloud. > > About pre-seeding systemvm template, see this: > > http://incubator.apache.org/cloudstack/docs/en-US/Apache_CloudStack/4.0.0-incubating/html/Installation_Guide/management-server-install-flow.html#prepare-system-vm-template > > You need to pre-seed, i.e. put a systemvm template on nfs with which your > systemvm, cpvm and domr are created. > > Regards. > > > > > > > On Thu, Nov 15, 2012 at 12:08 PM, Rohit Yadav <rohit.ya...@citrix.com > >wrote: > > > >> > >> On 15-Nov-2012, at 2:10 PM, Charles Moulliard <ch0...@gmail.com> wrote: > >> > >>> Using VirtualBox R4.2.4 on MacOS 10.7.5 and the image ( > >>> http://bhaisaab.org/vms/ubuntu-12.04-x86-minimal-vm.tar.gz) that you > >>> provide, the OS does not boot (screen stays black). > >> > >> Oh :( > >> Will start with a new image today again. Will keep you posted. > >> > >>> > >>> > >>> On Thu, Nov 15, 2012 at 9:13 AM, Charles Moulliard <ch0...@gmail.com> > >> wrote: > >>> > >>>> Many thanks. What do you mean by "*Preseed a systemvm template and you > >>>> should be good to go. (2. is the tricky one)" ?* > >> > >> Yes, this one: > >> 2. Configure network such that it's accessible to the host os and can > >> access Internet, > >> > >>>> *I have started to create a google document to define step-by-step > what > >>>> do do.* > >> > >> Cool. > >> > >>>> > >>>> > >>>> On Wed, Nov 14, 2012 at 11:19 AM, Rohit Yadav <rohit.ya...@citrix.com > >>> wrote: > >>>> > >>>>> > >>>>> On 14-Nov-2012, at 3:23 PM, Charles Moulliard <ch0...@gmail.com> > >> wrote: > >>>>> > >>>>>> Hi Rohit, > >>>>>> > >>>>>> Have you been able to finalize your work about creating a new Ubuntu > >>>>> image > >>>>>> for VirtualBox. If this is not the case, can you share with us > >>>>> (document, > >>>>>> ...) what you have done to configure Ubunttu (Installating MySQL, > >>>>> Tomcat, > >>>>>> ....) ? > >>>>> > >>>>> Hi Charles, > >>>>> > >>>>> Alright I'm back online, will work on releasing a devcloud image > that I > >>>>> hope would work out of the box, after some code monkey duties this > >> week. In > >>>>> the new image, mysql, tomcat, git etc. won't be installed on > devcloud. > >> The > >>>>> idea is that you develop on your host os, debug with your fav. IDE > and > >> run > >>>>> mgmt server, mysql, jetty/tomcat as well (if you want to do that on > >>>>> devcloud that too you can do). The default image will have only the > >>>>> preconfigured network, xen (kvm won't run as pv hypervisor, I knew it > >>>>> required hvm/intel-vt or amd-v, and I still tried just to see what > >> happens > >>>>> and it did not run) and nfs server. > >>>>> > >>>>> I've already shared the base os, which is x86 ubuntu precise > >>>>> http://bhaisaab.org/vms/ubuntu-12.04-x86-minimal-vm.tar.gz (note: > this > >>>>> is not devcloud, just the base system which is stripped down and > >> archived, > >>>>> ~250MB) Till I do that, you may try to diy devcloud, the top level > >> goals > >>>>> are to: 1. Install xen, 2. Configure network such that it's > accessible > >> to > >>>>> the host os and can access Internet, 3. Install and configure NFS, 4. > >>>>> Preseed a systemvm template and you should be good to go. (2. is the > >> tricky > >>>>> one) > >>>>> > >>>>> Just skip the following, something frivolous but for fun: > >>>>> Around devcloud, I'm experimenting a lot (slow internet, plus every > >> time > >>>>> I mess I start from a fresh copy) so not able to produce a final > >> image; you > >>>>> may call me crazy for what I'm going to share next: so I've a > >> raspberrypi > >>>>> with me (a dirt cheap small single board arm 32bit computer, 4 GB > >> sdcard, > >>>>> 512MB ram etc., http://www.raspberrypi.org and we know devcloud was > >>>>> cloud in a box, I'm trying to see if I can create a devpi or > basically > >>>>> devcloud but in hardware and not as a vm, basically cloud in your > >> pocket. I > >>>>> installed debian wheezy on it and xen pv for arm (xen cloudplaform > for > >> arm, > >>>>> this just blows up, even after cpvm disabled, ssvm etc. would just > >> blow it > >>>>> up), and this thing fails at the point when I restart it, also the > >> default > >>>>> sd card (it's storage, think hdd) is small (4GB) and the disk io is > >> very > >>>>> small re-flashing it every time consumes a lot of my time, ordered a > >> 16GB > >>>>> class10 sd card for better disk io, will keep you posted how this > >>>>> experiment went, I've a gut feeling though this won't work given the > >>>>> resource constraints. > >>>>> > >>>>> Regards. > >>>>> > >>>>>> > >>>>>> Regards, > >>>>>> > >>>>>> Charles > >>>>>> > >>>>>> > >>>>>> On Sun, Nov 11, 2012 at 5:50 PM, Rohit Yadav < > rohit.ya...@citrix.com> > >>>>> wrote: > >>>>>> > >>>>>>> Not really, in my setup I want eth0 to be host-only which is > causing > >>>>> some > >>>>>>> issues; another problem is I'm making it x86 only, so I see few > >>>>> crashes. > >>>>>>> Will update when I'm done. > >>>>>>> ________________________________________ > >>>>>>> From: Charles Moulliard [ch0...@gmail.com] > >>>>>>> Sent: Sunday, November 11, 2012 9:06 PM > >>>>>>> To: cloudstack-dev > >>>>>>> Subject: Re: Can we still use DevCloud VM Image ? > >>>>>>> > >>>>>>> Did you succeed it to fix the routing issues ? > >>>>>>> > >>>>>>> > >>>>>>> On Sat, Nov 10, 2012 at 1:53 PM, Rohit Yadav < > rohit.ya...@citrix.com > >>> > >>>>>>> wrote: > >>>>>>> > >>>>>>>> Hi Charles, it won't work as the vms inside host only network can > >> only > >>>>>>>> access the host os and other vms on it. Therefore devcloud inside > >>>>>>> host-only > >>>>>>>> network won't be able to reach the Internet. > >>>>>>>> I'm actually trying to create a new devcloud image with two > network > >>>>>>>> adapters, one NAT (eth1, so devcloud is able to reach the > Internet) > >>>>> and > >>>>>>> one > >>>>>>>> host-only adapter (eth0, so we can run mgmt server etc.) and it > will > >>>>> be > >>>>>>>> only 300-350MB (archived). I was trying not the share the image, > >>>>> having > >>>>>>>> some routing issues when I do that, will share as soon I fix those > >>>>>>> issues. > >>>>>>>> > >>>>>>>> -- > >>>>>>>> Rohit > >>>>>>>> PS. the base system is ubuntu x86 precise and the untouched > stripped > >>>>> down > >>>>>>>> vm is available here: http://bhaisaab.org/vms > >>>>>>>> ________________________________________ > >>>>>>>> From: Charles Moulliard [ch0...@gmail.com] > >>>>>>>> Sent: Saturday, November 10, 2012 4:46 PM > >>>>>>>> To: cloudstack-dev > >>>>>>>> Subject: Re: Can we still use DevCloud VM Image ? > >>>>>>>> > >>>>>>>> Hi, > >>>>>>>> > >>>>>>>> I have been able to setup the bridged adapter on virtualbox to > allow > >>>>> the > >>>>>>>> guest machine to get an IP address (from my DHCP server runinng in > >>>>> this > >>>>>>> lan > >>>>>>>> : 192.168.1x). > >>>>>>>> > >>>>>>>> The guest is configured like this : > >>>>>>>> > >>>>>>>> root@devcloud:/home/devcloud/download# more > /etc/network/interfaces > >>>>>>>> # The loopback network interface > >>>>>>>> auto lo > >>>>>>>> iface lo inet loopback > >>>>>>>> > >>>>>>>> # The primary network interface > >>>>>>>> auto xenbr0 > >>>>>>>> iface xenbr0 inet static > >>>>>>>> gateway 192.168.56.1 > >>>>>>>> address 192.168.56.2 > >>>>>>>> netmask 255.255.255.0 > >>>>>>>> bridge_ports eth0 > >>>>>>>> > >>>>>>>> auto eth0 > >>>>>>>> iface eth0 inet static > >>>>>>>> > >>>>>>>> auto eth1 > >>>>>>>> iface eth1 inet dhcp > >>>>>>>> *********************************** > >>>>>>>> eth1 Link encap:Ethernet HWaddr 08:00:27:df:00:00 > >>>>>>>> inet addr:192.168.1.6 Bcast:192.168.1.255 > >>>>> Mask:255.255.255.0 > >>>>>>>> inet6 addr: fe80::a00:27ff:fedf:0/64 Scope:Link > >>>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > >>>>>>>> xenbr0 Link encap:Ethernet HWaddr 08:00:27:7e:74:9c > >>>>>>>> inet addr:192.168.56.2 Bcast:192.168.56.255 > >>>>>>> Mask:255.255.255.0 > >>>>>>>> inet6 addr: fe80::a00:27ff:fe7e:749c/64 Scope:Link > >>>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > >>>>>>>> ************************************* > >>>>>>>> ip route > >>>>>>>> default via 192.168.56.1 dev xenbr0 metric 100 > >>>>>>>> 192.168.1.0/24 dev eth1 proto kernel scope link src > 192.168.1.6 > >>>>>>>> 192.168.56.0/24 dev xenbr0 proto kernel scope link src > >>>>> 192.168.56.2 > >>>>>>>> ************************************** > >>>>>>>> > >>>>>>>> Unfortunately, DNS resolution still does not work. Is there > >> something > >>>>>>> else > >>>>>>>> to do ? > >>>>>>>> > >>>>>>>> root@devcloud:/home/devcloud/download# wget > >>>>>>>> > >>>>>>>> > >>>>>>> > >>>>> > >> > http://be.mirror.eurid.eu/centos/6.3/isos/x86_64/CentOS-6.3-x86_64-minimal.iso > >>>>>>>> --2012-11-10 03:11:46-- > >>>>>>>> > >>>>>>>> > >>>>>>> > >>>>> > >> > http://be.mirror.eurid.eu/centos/6.3/isos/x86_64/CentOS-6.3-x86_64-minimal.iso > >>>>>>>> Resolving be.mirror.eurid.eu (be.mirror.eurid.eu)... failed: > >>>>> Temporary > >>>>>>>> failure in name resolution. > >>>>>>>> wget: unable to resolve host address `be.mirror.eurid.eu' > >>>>>>>> > >>>>>>>> Regards, > >>>>>>>> > >>>>>>>> Charles > >>>>>>>> > >>>>>>>> > >>>>>>>> On Mon, Nov 5, 2012 at 7:33 PM, Edison Su <edison...@citrix.com> > >>>>> wrote: > >>>>>>>> > >>>>>>>>> The latest devcloud vm using host-only-network(if you follow the > >>>>> steps > >>>>>>> in > >>>>>>>>> > >>>>>>>> > >>>>>>> > >>>>> > >> > https://cwiki.apache.org/CLOUDSTACK/cloudstack-devcloud-environment-setup.html > >>>>>>>> ), > >>>>>>>>> which means, devcloud vm can't not access public network, thus, > >>>>>>> download > >>>>>>>>> template/iso doesn't work. > >>>>>>>>> To fix the issue: > >>>>>>>>> 1. You can use "Bridged networking", plug devcloud vm into the > >>>>> network > >>>>>>>>> used by your laptop. Need to change devcloud vm's ip to the ip > >>>>> address > >>>>>>> in > >>>>>>>>> your subnet. And also need to change tools/devcloud/devcloud.cfg > >>>>>>>>> 2. Add a new network adaptor to devcloud vm, which is plugged > into > >>>>>>>>> "Bridged networking". So devcloud vm will have two nics, one is > on > >>>>>>>>> "host-only network", another one is on "bridge networking", which > >> can > >>>>>>>>> access public network. Then add default route on the bridge > network > >>>>>>> nic. > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> -----Original Message----- > >>>>>>>>> From: Charles Moulliard [mailto:ch0...@gmail.com] > >>>>>>>>> Sent: Sunday, November 04, 2012 11:34 PM > >>>>>>>>> To: cloudstack-dev > >>>>>>>>> Subject: Can we still use DevCloud VM Image ? > >>>>>>>>> > >>>>>>>>> Hi, > >>>>>>>>> > >>>>>>>>> Last tests with DevCloud VM ( > >>>>>>>>> > >>>>>>>>> > >>>>>>>> > >>>>>>> > >>>>> > >> > https://cwiki.apache.org/CLOUDSTACK/cloudstack-devcloud-environment-setup.html > >>>>>>>>> ) > >>>>>>>>> does not succeed on my Linux machine. Management server works > fine > >>>>> like > >>>>>>>>> also creation of tiny instances but there are issues with NFS > >> mount, > >>>>>>> DNS > >>>>>>>>> and of course to download new ISO file (CentOs, ...). That was > not > >>>>> the > >>>>>>>>> case a few days ago > >>>>>>>>> > >>>>>>>>> NFS & Primary/Secondary storage > >>>>>>>>> > >>>>>>>>> WARN [network.element.VpcVirtualRouterElement] (secstorage-1:) > >>>>> Network > >>>>>>>>> Ntwk[204|Guest|6] is not associated with any VPC WARN > >>>>>>>>> [network.element.VpcVirtualRouterElement] (consoleproxy-1:) > Network > >>>>>>>>> Ntwk[204|Guest|6] is not associated with any VPC WARN > >>>>>>>>> [network.element.VpcVirtualRouterElement] (secstorage-1:) Network > >>>>>>>>> Ntwk[202|Control|3] is not associated with any VPC WARN > >>>>>>>>> [network.element.VpcVirtualRouterElement] (consoleproxy-1:) > Network > >>>>>>>>> Ntwk[202|Control|3] is not associated with any VPC WARN > >>>>>>>>> [network.element.VpcVirtualRouterElement] (secstorage-1:) Network > >>>>>>>>> Ntwk[201|Management|2] is not associated with any VPC WARN > >>>>>>>>> [network.element.VpcVirtualRouterElement] (consoleproxy-1:) > Network > >>>>>>>>> Ntwk[201|Management|2] is not associated with any VPC WARN > >>>>>>>>> [network.element.VpcVirtualRouterElement] (secstorage-1:) Network > >>>>>>>>> Ntwk[203|Storage|4] is not associated with any VPC WARN > >>>>>>> [utils.nio.Link] > >>>>>>>>> (AgentManager-Selector:) SSL: Fail to find the generated > keystore. > >>>>>>>> Loading > >>>>>>>>> fail-safe one to continue. > >>>>>>>>> WARN [storage.download.DownloadListener] (Timer-4:) Entering > >>>>> download > >>>>>>>>> error state: timeout waiting for response from storage host, > >>>>>>>>> template=centos.iso at host nfs://192.168.56.2: > >>>>> /opt/storage/secondary > >>>>>>>>> > >>>>>>>>> DNS > >>>>>>>>> > >>>>>>>>> root@devcloud:/home/devcloud/download# wget > >>>>>>>>> > >>>>>>>> > >>>>>>> > >>>>> > >> > http://ftp.belnet.be/packages/centos/6.3/isos/x86_64/CentOS-6.3-x86_64-minimal.iso > >>>>>>>>> --2012-11-04 23:17:41-- > >>>>>>>>> > >>>>>>>>> > >>>>>>>> > >>>>>>> > >>>>> > >> > http://ftp.belnet.be/packages/centos/6.3/isos/x86_64/CentOS-6.3-x86_64-minimal.iso > >>>>>>>>> Resolving ftp.belnet.be (ftp.belnet.be)... failed: Temporary > >> failure > >>>>>>> in > >>>>>>>>> name resolution. > >>>>>>>>> wget: unable to resolve host address `ftp.belnet.be' > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> Question : Is Devcloud VM image ( > >>>>>>>>> http://download.cloud.com/templates/devcloud/DevCloud.ova) still > >> up > >>>>> to > >>>>>>>>> date to work with Cloudstack 4.10-SNAPSHOT ? > >>>>>>>>> > >>>>>>>>> Regards, > >>>>>>>>> > >>>>>>>>> -- > >>>>>>>>> Charles Moulliard > >>>>>>>>> Apache Committer / Sr. Enterprise Architect (RedHat) Twitter : > >>>>>>>> @cmoulliard > >>>>>>>>> | Blog : http://cmoulliard.blogspot.com > >>>>>>>>> > >>>>>>>> > >>>>>>>> > >>>>>>>> > >>>>>>>> -- > >>>>>>>> Charles Moulliard > >>>>>>>> Apache Committer / Sr. Enterprise Architect (RedHat) > >>>>>>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com > >>>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> -- > >>>>>>> Charles Moulliard > >>>>>>> Apache Committer / Sr. Enterprise Architect (RedHat) > >>>>>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com > >>>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> -- > >>>>>> Charles Moulliard > >>>>>> Apache Committer / Sr. Enterprise Architect (RedHat) > >>>>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com > >>>>> > >>>>> > >>>> > >>>> > >>>> -- > >>>> Charles Moulliard > >>>> Apache Committer / Sr. Enterprise Architect (RedHat) > >>>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com > >>>> > >>>> > >>>> > >>> > >>> > >>> -- > >>> Charles Moulliard > >>> Apache Committer / Sr. Enterprise Architect (RedHat) > >>> Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com > >> > >> > > > > > > -- > > Charles Moulliard > > Apache Committer / Sr. Enterprise Architect (RedHat) > > Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com > > -- Charles Moulliard Apache Committer / Sr. Enterprise Architect (RedHat) Twitter : @cmoulliard | Blog : http://cmoulliard.blogspot.com
