So, I have added vlan 10 to all the ports on the switch, including port 1 which is connected to the router. Does the router need to be VLAN aware? If so, that might be a problem as it belongs to my ISP.
Does anyone have experience with Dell power edge switches as it pertains to a cloud stack setup? Regards, Trevor Francis (mobile) On Nov 2, 2012, at 12:05 AM, Ahmad Emneina <[email protected]> wrote: > The docs don¹t explicitly say don¹t install CSP for advanced installs. It > does speak to it being a step in the basic zone installation section. > > Trevor, I think youre on the right track to getting your cat pelt. I do > this exact same thing in a couple clouds I have provisioned. Make sure > VLAN 10 has an interface on your switch that routes, giving the vlan > interface an ip address to be used as the gateway for your shared network. > > On 11/1/12 8:59 PM, "Trevor Francis" <[email protected]> > wrote: > >> Hmm, that isn't represented in the docs (3.02 or 4.0)Š Not quite sure how >> to remove it. >> >> Yes, I am running an advanced network because I have 3 physical bonds on >> my hosts and it is my intent to direct assign a public ip address and a >> private ip address to my VMs. >> >> Is there a better way to skin a cat? I can't do NAT because of the nature >> of the application deployed over the cloud instances. >> >> TGF >> >> >> On Nov 1, 2012, at 10:55 PM, Kirk Kosinski <[email protected]> wrote: >> >>> Hi, Trevor. Are you using a basic zone with Security Groups? It sounds >>> like you aren't since you mentioned creating multiple shared networks. >>> You should not install the CSP on XS hosts in an advanced zone or a >>> basic zone without SGs. Doing so can result in network connectivity >>> issues for VMs. >>> >>> Best regards, >>> Kirk >>> >>> On 11/01/2012 08:42 PM, Trevor Francis wrote: >>>> yeap. >>>> >>>> On Nov 1, 2012, at 10:38 PM, "Kristoffer Sheather - Cloud Central" >>>> <[email protected]> wrote: >>>> >>>>> Have you installed the XenServer Cloud Support Pack (CSP)? >>>>> >>>>> ---------------------------------------- >>>>> From: "Trevor Francis" <[email protected]> >>>>> Sent: Friday, November 02, 2012 2:24 PM >>>>> To: "[email protected]" >>>>> <[email protected]> >>>>> Subject: Xenserver Shared Public Network >>>>> >>>>> So, I abandoned KVM due to Bonding floods that the community was >>>>> unable to >>>>> resolve. I have no idea why it was happening. >>>>> >>>>> Anyway. I am now on XS 6.02 and trying to deploy my network. I have >>>>> created >>>>> a shared public network and a shared private network. I have both >>>>> VLANS in >>>>> my switches (10 = public, and 11 = private). There is a VR for the >>>>> shared >>>>> public network, just being used to hand out dhcp. The guest VMs can >>>>> get out >>>>> on the isolated private network, but are unable to get out on the >>>>> shared >>>>> public network. Both networks are able to pull dhcp from their >>>>> respective >>>>> virtual routers. >>>>> >>>>> The VMs cannot ping any system VMs (even though they reside on the >>>>> same >>>>> physical host) and the host cannot ping the vms. >>>>> >>>>> Any thoughts? >>>>> >>>>> TGF > > > -- > Æ > > >
