Please take a look at the installation guidelines to tune the parameters
such as worker threads, number of connections etc., which are the
parameters that need to be tuned based on the load scale and the server
machine.
There is no single proper value for load_scale to utilize the server,
since the utilization depends on the features of the server machine. You
can start with a value and then tune it by monitoring the server
utilization and tuning the parameters mentioned in the installation
guide and then increasing/decreasing load_scale accordingly.
Ideally, you'd like to have all the statistics to be passed. If some of
them fail, it is an indication of some mistuned server parameters or
higher load than the server can handle.
--
Cansu
On 07/18/2012 04:10 AM, suixiufeng wrote:
Hi,all:
I found the cpu and memory utilization of web serving is low. I wonder
how to set the corresponding parameters to increase the cpu and memory
utilizaiton.
what is the proper value of load_scale?
I found there were several failed statistics in the Summary Report. Does
it matter?
ps: I install web serving on a virtual machine with one vcpu and 4GB mem.
