Hi
What I understand is that you ran the client and server separately. I mean start/stop the client and then start/stop the server. Is that correct? On 04/18/2013 2:47, Jinchun Kim wrote: > Hi, All. > I'm trying to run memory intensive simulation with media streaming benchmark. > I followed the setup procedure described on CloudSuite website and > installed Media streaming benchmark on my Linux machine. > But I'm not quite sure if I'm running the benchmark correctly. > I tested media streaming benchmark with following command. > > sh scripts/start-run.sh 200 shorthi 165.91.212.1 2 > (165.91.212.1 is ip address of localhost) > After 5~6 minutes, the benchmark was done and simulation results were > written to /tmp/output/15. > Based on the output from /tmp/output/15/summary.xml, > it seems like test was finished without an error. > > 0.467 > 121.645 > 3.422 > 3.300 > false > 3.300 > > ........................................................................ > ........................................................................ > > 5706 > 0 > 1.0000 > 1.0000 > true > > However, when I run Darwin Streaming Server with /usr/local/sbin/DarwinStreamingServer -dDS 1 > there was no communication between server and client. > > RTP-Conns RTSP-Conns ..... AvgQuality NumThinned Time > 0 0 ..... 0 0 2013-04-17 16:35:58 > So I was wondering if I am on the right direction... > Do I need to do something else to setup server-client configuration? > -- > > Thanks, Jinchun Kim -- Regards, Mahmood
