Hi, I’ve never run both on the same machine. Try run it on different machines.
If you are violating the 99-th percentile latency, you can change the number of concurrent clients with the SCALE parameter. Regards, Javier > On 23 Feb 2016, at 07:28, nishtala <[email protected]> wrote: > > Hi Javier, > > > > On 2016-02-23 00:21, Javier Picorel wrote: >> Hi Nishtala, >> >> I see two problems. >> >> 1) Are the client and server machines in the 0.0.0.X subnet? For some >> reason, it cannot >> open a TCP/IP connection on that address. Can you verify that this is a >> valid subnet? > Could it be because the server-client are on the same machine? >> >> 2) Don’t forget to set the $IP global variable. It has to point to the IP of >> the server machine. > I did set the IP variable. >> >> Hope this helps! >> >> Regards, >> Javier >> >>> On 22 Feb 2016, at 16:37, nishtala <[email protected]> wrote: >>> >>> <server.sh> > > > WARNING / LEGAL TEXT: This message is intended only for the use of the > individual or entity to which it is addressed and may contain > information which is privileged, confidential, proprietary, or exempt > from disclosure under applicable law. If you are not the intended > recipient or the person responsible for delivering the message to the > intended recipient, you are strictly prohibited from disclosing, > distributing, copying, or in any way using this message. If you have > received this communication in error, please notify the sender and > destroy and delete any copies you may have received. > > http://www.bsc.es/disclaimer
