Ok I finally got it to run. I've done it this way:
EXECUTE_PROCESS(COMMAND cmd /c regsvr32 test.dll
WORKING_DIRECTORY "C:/Program Files/test/lib"
OUTPUT_VARIABLE ov RESULT_VARIABLE rv
OUTPUT_STRIP_TRAILING_WHITESPACE
)
Works fine, but there is still the problem to get the target build name for
installing the dll because it differs from debug to release build. When the
debug configuration was selected the debug dll should be installed and
registered and vice versa for release.
Do you have any ideas to solve this?
-----Ursprüngliche Nachricht-----
Von: David Cole [mailto:david.c...@kitware.com]
Gesendet: Dienstag, 15. März 2011 17:05
An: Urbach, Marcel [Rohmann GmbH]
Cc: cmake@cmake.org
Betreff: Re: [CMake] INSTALL CODE using EXEC_PROGRAM with spaces in path
Generator expressions (like your "<TARGET_FILE_NAME:${project_name}>")
are only valid within the context of an add_custom_command call. Some
are also available from the newer signature of the add_test command.
See the docs for each of those for specific supported generator expressions.
In the context of a CMake -P script (which an INSTALL(SCRIPT snippet
is...) those are not interpreted in any way, and so will be passed
directly as arguments to regsvr.
You could see exactly what's being passed to the called executable by
using a batch file or writing the tiniest c program possible to figure
it all out.
Boil it down to the very simplest script you can. Write an install
script that has a bunch of hard-coded values in it until you have an
execute_process command line that works. Then gradually generalize it
from there. I think that approach will show you that execute_process
works just fine if you pass it reasonable arguments.
HTH,
David
On Tue, Mar 15, 2011 at 5:11 AM, Urbach, Marcel [Rohmann GmbH]
<urb...@rohmann.de> wrote:
>
> Hi David
>
> Your solution works fine, but i still got the problem with execute_process.
> Right now I use it this way:
>
> #cmakelists.txt
> ADD_LIBRARY(${project_name} SHARED ${sources} ${headers} ${idls} ${generated}
> ${resources} )
> SET(project_out "${INSTALL_LIB_DIR}/${project_name}_d.dll")
> STRING(REGEX REPLACE "/" "\\\\\\\\" project_out ${project_out} )
> register_shared_libraries(${project_name} "${project_out}" )
>
> #global.cmake
> FUNCTION(register_shared_libraries)
> IF (WIN32)
> SET(param1 ${ARGV0})
> SET(param2 ${ARGV1})
> CONFIGURE_FILE(${CMAKE_SOURCE_DIR}/post_install.cmake.in
> ${CMAKE_CURRENT_BINARY_DIR}/post_install.cmake @ONLY
> )
> INSTALL(SCRIPT "${CMAKE_CURRENT_BINARY_DIR}/post_install.cmake")
> ENDIF()
> ENDFUNCTION()
>
> #post_install.cmake.in
> SET(file_name "@param2@")
> MESSAGE(STATUS "file_name: ${file_name}")
> EXEC_PROGRAM( regsvr32
> ARGS \"/s\"
> ARGS \"${file_name}\"
> OUTPUT_VARIABLE ov RETURN_VALUE rv )
>
> MESSAGE("out ${ov}")
> MESSAGE("res ${rv}")
>
> SET(project_name "@param1@")
> MESSAGE(STATUS "project_name: ${project_name}")
> EXECUTE_PROCESS(COMMAND regsvr32 #$<TARGET_FILE:${project_name}>
> INPUT_FILE $<TARGET_FILE_NAME:${project_name}>
> WORKING_DIRECTORY $<TARGET_FILE_DIR:${project_name}>
> OUTPUT_VARIABLE ov RESULT_VARIABLE rv
> )
> MESSAGE("out ${ov}")
> MESSAGE("res ${rv}")
>
>
> The first version using EXEC_PROGRAM works fine, but there is a problem
> resolving the target name. XXX.dll for release or XXX_d.for debug.
> The second (EXECUTE_PROCESS) never returns from regsvr32 when using regsvr32
> #$<TARGET_FILE:${project_name}> or it says wrong syntax for file name or dir
> name when using regsvr32 INPUT_FILE $<TARGET_FILE_NAME:${project_name}>
> WORKING_DIRECTORY $<TARGET_FILE_DIR:${project_name}>
>
>
>
>
>
> -----Ursprüngliche Nachricht-----
> Von: David Cole [mailto:david.c...@kitware.com]
> Gesendet: Montag, 14. März 2011 17:17
> An: Urbach, Marcel [Rohmann GmbH]
> Cc: cmake@cmake.org
> Betreff: Re: [CMake] INSTALL CODE using EXEC_PROGRAM with spaces in path
>
> On Mon, Mar 14, 2011 at 11:17 AM, Urbach, Marcel [Rohmann GmbH]
> <urb...@rohmann.de> wrote:
>> I have already tried to use the SCRIPT. But there is a problem to submit the
>> name of the dll or the project name to the extern script. I need something
>> like a parameter and I guess that doesn't exsist. Do you have any ideas to
>> solve this?
>> INSTALL(SCRIPT "PostInst.cmake" PARAMETeR...)
>>
>
> How about something like this?
>
> # File "script.cmake.in"
> set(p1 "@param1@")
> execute_process(COMMAND xyz ${p1} OUTPUT_VARIABLE ov RESULT_VARIABLE rv)
> if(NOT rv STREQUAL "0")
> message(FATAL_ERROR "xyz failed: rv='${rv}'")
> endif()
>
> And then:
>
> # in CMakeLists.txt
> set(param1 "value-of-p1")
> configure_file(${CMAKE_CURRENT_SOURCE_DIR}/script.cmake.in
> ${CMAKE_CURRENT_BINARY_DIR}/script.cmake @ONLY)
> install(SCRIPT "${CMAKE_CURRENT_BINARY_DIR}/script.cmake")
>
>
> I have written code in the past which calls regsvr32 successfully.
> What are the arguments you are passing that are causing problems? Can
> you call the same regsvr32 from the Windows command prompt
> successfully? Are you using the same regsvr32 in both scenarios?
>
>
>> I also tried to use execute_process, but it didn't work with regsvr32.
>> It ended in an endless loop. Only a timeout could break it. Can you confirm
>> that?
>>
>> -----Ursprüngliche Nachricht-----
>> Von: David Cole [mailto:david.c...@kitware.com]
>> Gesendet: Freitag, 11. März 2011 16:50
>> An: Tyler
>> Cc: Urbach, Marcel [Rohmann GmbH]; cmake@cmake.org
>> Betreff: Re: [CMake] INSTALL CODE using EXEC_PROGRAM with spaces in path
>>
>> Tyler's right. Use install(SCRIPT instead.
>>
>> And use execute_process instead of exec_program. It's better.
>>
>> From the help at
>> http://cmake.org/cmake/help/cmake-2-8-docs.html#command:execute_process
>> :
>> "The execute_process command is a newer more powerful version of
>> exec_program, but the old command has been kept for compatibility."
>>
>>
>> On Fri, Mar 11, 2011 at 10:34 AM, Tyler <ty...@cryptio.net> wrote:
>>> I believe the canonical answer is to write the command line you wish
>>> to execute into a file and use install(SCRIPT ...) instead of
>>> install(CODE ...).
>>>
>>> tyler
>>>
>>> On Fri, Mar 11, 2011 at 7:14 AM, Urbach, Marcel [Rohmann GmbH]
>>> <urb...@rohmann.de> wrote:
>>>> Hi,
>>>>
>>>> I am using Windows 7 and I have tried to register my builded dll files with
>>>> regsvr32 after installing them. It works for paths without spaces.
>>>>
>>>>
>>>>
>>>> INSTALL( CODE
>>>>
>>>> "EXEC_PROGRAM( regsvr32 ARGS \"/s\" ARGS \"C:\\lib\\test.dll\"
>>>> OUTPUT_VARIABLE POST_INST_OUT RETURN_VALUE POST_INST_RES )"
>>>>
>>>> )
>>>>
>>>>
>>>>
>>>> But when there a spaces inside a path regsvr32 returns with an error:
>>>>
>>>> "Error loading module "C:\Program".
>>>>
>>>>
>>>>
>>>> INSTALL( CODE
>>>>
>>>> "EXEC_PROGRAM( regsvr32 ARGS \"/s\" ARGS \"C:\\Program
>>>> Files\\test\\lib\\test.dll\" OUTPUT_VARIABLE POST_INST_OUT RETURN_VALUE
>>>> POST_INST_RES )"
>>>>
>>>> )
>>>>
>>>>
>>>>
>>>> I have spended the whole day escaping the path in the right way but I
>>>> don't
>>>> get it.
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Powered by www.kitware.com
>>>>
>>>> Visit other Kitware open-source projects at
>>>> http://www.kitware.com/opensource/opensource.html
>>>>
>>>> Please keep messages on-topic and check the CMake FAQ at:
>>>> http://www.cmake.org/Wiki/CMake_FAQ
>>>>
>>>> Follow this link to subscribe/unsubscribe:
>>>> http://www.cmake.org/mailman/listinfo/cmake
>>>>
>>> _______________________________________________
>>> Powered by www.kitware.com
>>>
>>> Visit other Kitware open-source projects at
>>> http://www.kitware.com/opensource/opensource.html
>>>
>>> Please keep messages on-topic and check the CMake FAQ at:
>>> http://www.cmake.org/Wiki/CMake_FAQ
>>>
>>> Follow this link to subscribe/unsubscribe:
>>> http://www.cmake.org/mailman/listinfo/cmake
>>>
>> _______________________________________________
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the CMake FAQ at:
>> http://www.cmake.org/Wiki/CMake_FAQ
>>
>> Follow this link to subscribe/unsubscribe:
>> http://www.cmake.org/mailman/listinfo/cmake
>>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the CMake FAQ at:
> http://www.cmake.org/Wiki/CMake_FAQ
>
> Follow this link to subscribe/unsubscribe:
> http://www.cmake.org/mailman/listinfo/cmake
>
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the CMake FAQ at:
http://www.cmake.org/Wiki/CMake_FAQ
Follow this link to subscribe/unsubscribe:
http://www.cmake.org/mailman/listinfo/cmake
