Re: [CMake] Problems with coverage on OS X Server

NoRulez Sat, 24 Mar 2012 10:34:31 -0700

But it seems that there is something missing, because I also get the message that no coverage files were found for some projects:

-- Coverage Continuous --
Cannot find any coverage files. Ignoring Coverage request.

Here are my version informations:
$ clang --version
Apple clang version 3.0 (tags/Apple/clang-211.10.1) (based on LLVM 3.0svn)
Target: x86_64-apple-darwin10.8.0
Thread model: posix

$ gcc --version
i686-apple-darwin10-llvm-gcc-4.2 (GCC) 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.1.00)
Copyright (C) 2007 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

$ ctest --version
ctest version 2.8.7

$ gcov --version
gcov (GCC) 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.1.00)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.

Am 24. März 2012 um 18:12 schrieb David Cole <david.c...@kitware.com>:

Yes, the ENV approach is the right way to do it. (that's how I did it,
too, although in the calling env and not in the script itself...
either is fine)

On Sat, Mar 24, 2012 at 1:10 PM, NoRulez <noru...@me.com> wrote:
> Thanks David,
>
> I think I found a solution, so if someone is also interessted in this, here
> is how i configured clang in a CTestScript.cmake file:
>
> if (APPLE)
>     set (ENV{CC} clang)
>     set (ENV{CXX} clang++)
> endif (APPLE)
>
> .
> .
> .
>
> ctest_start()
> ctest_update()
> ctest_configure()
> .
> .
> .
>
>
> Best Regards
> NoRulez
>
> Am 24. März 2012 um 17:42 schrieb "NoRulez" <noru...@me.com>:
>
>
> I've tried to set the C/C++ compiler as followed:
>     if (APPLE)
>         SET(CMAKE_C_COMPILER "/usr/bin/clang")
>         SET(CMAKE_CXX_COMPILER "/usr/bin/clang++")
>     endif (APPLE)
>
> But the result from the build is:
> -- Update Continuous --
> -- Configure Continuous --
> -- Reading custom configuration Continuous - Arachne --
> -- Build Continuous --
> -- Test Continuous --
> No tests were found!!!
> -- Coverage Continuous --
> Cannot find any coverage files. Ignoring Coverage request.
> -- Memcheck Continuous --
> No tests were found!!!
> -- Submit Continuous --
>
> Best Regards
> NoRulez
>
> Am 24. März 2012 um 17:31 schrieb "NoRulez" <noru...@me.com>:
>
> I've found this
> http://stackoverflow.com/questions/7031126/switching-between-gcc-and-clang-llvm-using-cmake
>
> Is this all which I need to configure or did you do something
> different/special?
> Please could you post your settings to use clang instead of gcc on OS X
>
> Thanks in advance
>
> Best Regards
> NoRulez
>
> Am 24. März 2012 um 15:31 schrieb David Cole <david.c...@kitware.com>:
>
> Well, I've had mixed results trying this myself.
>
> With the trivial SmallAndFast project, I get a good coverage
> measurement on 5 lines of code in 1 source file:
> http://my.cdash.org/viewCoverage.php?buildid=313323&status=3
>
> With CMake itself, I get a bunch of *.gcda files generated in the
> build tree, but the coverage info does not get communicated properly
> via a ctest script sending to CDash. Looks like there's some issue
> with ctest parsing of the gcov output using ctest 2.8.7 and clang on
> the Mac and gcov 4.2.1:
>
> $ gcov --version
> gcov (GCC) 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.1.00)
>
> Looks like there's a problem somebody will have to fix before it will
> work. Unfortunately, the gcov parsing code in ctest is a bit of a
> tangle -- last time I was in there, I fixed some stuff up to work in a
> MinGW environment, and it's not pretty. Also unfortunately, I don't
> think I'll have the bandwidth to look at this myself in the near
> future: anybody want to volunteer to take a look and submit a patch to
> get this working...?
>
>
> Thx,
> David
>
>
> On Sat, Mar 24, 2012 at 8:53 AM, David Cole <david.c...@kitware.com> wrote:
>> The answer to that stackoverflow question recommends using
>> clang/clang++ instead. (I have not tried this yet myself, but would
>> not be entirely surprised to find out it's correct. I have observed
>> the zero coverage phenomenon on my own Mac laptop, but have sufficient
>> coverage capabilities elsewhere... so I didn't care enough to follow
>> up on it previously.)
>>
>>
>> HTH,
>> David
>>
>>
>>
>> On Sat, Mar 24, 2012 at 8:51 AM, David Cole <david.c...@kitware.com>
>> wrote:
>>> Perhaps it's because of this problem with the Mac "gcc" which is not
>>> *really* just gcc anymore, and apparently doesn't support gcov
>>> transparently as it should...
>>>
>>>
>>> http://stackoverflow.com/questions/7988355/getting-0-gcov-coverage-for-a-mac-app
>>>
>>>
>>> On Sat, Mar 24, 2012 at 7:45 AM, <noru...@me.com> wrote:
>>>> Hello,
>>>>
>>>> I have the following code in the main CTestScript.cmake which I call
>>>> with
>>>> "ctest -S CTestScript.cmake, Continuous":
>>>>
>>>> SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g -O0 -Wall -W
>>>> -Wunused-variable -Wunused-parameter -Wunused-function -Wunused
>>>> -Wno-system-headers -Wno-deprecated -Woverloaded-virtual -Wwrite-strings
>>>> -fprofile-arcs -ftest-coverage")
>>>>     SET(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -g -O0 -Wall -W -fprofile-arcs
>>>> -ftest-coverage")
>>>>     SET(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -fprofile-arcs
>>>> -ftest-coverage")
>>>>     SET(CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS}
>>>> -fprofile-arcs -ftest-coverage")
>>>>     SET(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS}
>>>> -fprofile-arcs -ftest-coverage")
>>>>
>>>>     FILE(WRITE "${CTEST_BINARY_DIRECTORY}/CMakeCache.txt" "
>>>>          CMAKE_CXX_FLAGS:STRING=@CMAKE_CXX_FLAGS@
>>>>          CMAKE_C_FLAGS:STRING=@CMAKE_C_FLAGS@
>>>>          CMAKE_EXE_LINKER_FLAGS:STRING=@CMAKE_EXE_LINKER_FLAGS@
>>>>          CMAKE_MODULE_LINKER_FLAGS:STRING=@CMAKE_MODULE_LINKER_FLAGS@
>>>>          CMAKE_SHARED_LINKER_FLAGS:STRING=@CMAKE_SHARED_LINKER_FLAGS@
>>>>          ")
>>>>
>>>>
>>>>     ## -- Configure
>>>>     message (" -- Configure ${MODEL} - ${CTEST_BUILD_NAME} --")
>>>>     ctest_configure (BUILD "${CTEST_BINARY_DIRECTORY}")
>>>>
>>>>
>>>>
>>>> On Windows XP and on Ubuntu Linux Server 11.10 it works and I get
>>>> coverage
>>>> information.
>>>>
>>>> But on OS X Lion Server I didn't get any coverage informations.
>>>>
>>>> On OS X the command gcov is available.
>>>>
>>>>
>>>> Could someone please help?
>>>>
>>>>
>>>> Thanks in advance
>>>>
>>>>
>>>> Best Regards
>>>>
>>>> NoRulez
>>>>
>>>>
>>>> --
>>>>
>>>> Powered by www.kitware.com
>>>>
>>>> Visit other Kitware open-source projects at
>>>> http://www.kitware.com/opensource/opensource.html
>>>>
>>>> Please keep messages on-topic and check the CMake FAQ at:
>>>> http://www.cmake.org/Wiki/CMake_FAQ
>>>>
>>>> Follow this link to subscribe/unsubscribe:
>>>> http://www.cmake.org/mailman/listinfo/cmake

--

Powered by www.kitware.com


Visit other Kitware open-source projects at 
http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the CMake FAQ at: 
http://www.cmake.org/Wiki/CMake_FAQ

Follow this link to subscribe/unsubscribe:
http://www.cmake.org/mailman/listinfo/cmake

Re: [CMake] Problems with coverage on OS X Server

Reply via email to