> HOLE is what I am looking for. Or, as illustrated in other reactions, HOLE is what you simply don't need for the primary output of LOOKUP. In such a case HOLE is pure overhead
Kris Buelens, --- freelance z/VM consultant, Belgium --- ----------------------------------------------------------------------- 2015-07-08 13:57 GMT+02:00 Mark Pace <pacemainl...@gmail.com>: > Thank you all for the suggestions. For this need, and for clarity of this > code, HOLE is what I am looking for. > > On Wed, Jul 8, 2015 at 2:18 AM, Moshe (Mark) Hillson < > mhillson1...@gmail.com > > wrote: > > > Hello, > > > > Use a stage called "HOLE" as last stage of primary and secondary stream. > > > > M Hillson. > > > > > > > > > > -----Original Message----- > > From: CMSTSO Pipelines Discussion List [mailto: > CMS-PIPELINES@VM.MARIST.EDU] > > On Behalf Of Mark Pace > > Sent: Wednesday, July 08, 2015 12:06 AM > > To: CMS-PIPELINES@VM.MARIST.EDU > > Subject: [CMS-PIPELINES] Output to the bit bucket > > > > I'm doing a lookup - but I don't want output from the Primary and > > Seconday, I only want to see the Tertiary output. What can I put in > place > > of the console stage to send the output to the bit bucket? > > > > 'pipe (endchar ?)', > > 'stem BST.', > > '| l: lookup', > > '| specs /P:/ 1 1-* next', > > '| console', > > '?', > > 'stem VSE.', > > '| l:', > > '| specs /S:/ 1 1-* next', > > '| console', > > '?', > > 'l:', > > '| specs /T:/ 1 1-* next', > > '| console' > > > > -- > > The postings on this site are my own and don’t necessarily represent > > Mainline’s positions or opinions > > > > Mark D Pace > > Senior Systems Engineer > > Mainline Information Systems > > > > > > -- > The postings on this site are my own and don’t necessarily represent > Mainline’s positions or opinions > > Mark D Pace > Senior Systems Engineer > Mainline Information Systems >