The last test I did do not send any error message but £4 and £5 are not incremented as it is supposed based on the if :
>From the q da details command : a is the cyls value b is the serial number value c is the ssid value "! SPECs", " a: 54.5 .", " b: 67.10 .", " c: 85.4 .", " set £1:=a", " set £2:=b", " set £3:=c", " set £4:=0", " set £5:=0", " if (£1==a & £2==b & £3==c) then", " set £4+=1", " set £5:=1", " else", " set £1:=a", " set £2:=b", " set £3:=c", " set £4:=1", " set £5+=1", " endif", " 1-* 1", " print £4 picture 99999 nextword", " print £5 picture 99999 next", "!01:" De : CMS/TSO Pipelines Discussion List <cms-pipeli...@listserv.meduniwien.ac.at> de la part de John P. Hartmann <m...@jphartmann.eu> Date : samedi, 26 novembre 2022 à 14:15 À : cms-pipeli...@listserv.meduniwien.ac.at <cms-pipeli...@listserv.meduniwien.ac.at> Objet : Re: IF testing characters ! is the vertical bar (|) on most European terminals. It would have been nice to know the actual error message. On 11/26/22 12:14, Kris Buelens wrote: > I don't understand what these > !!!! are supposed to do