Here is a remote starter switch: http://www.amazon.com/dp/B0009XQUKW/?tag=hyprod-20&hvadid=15470396379&hvpos=1o1&hvexid=&hvnetw=g&hvrand=168824207439294199&hvpone=&hvptwo=&hvqmt=&ref=asc_df_B0009XQUKW
Not much to it. I'm sure you can pick up something similar at any auto parts store. Joel On Wed, Aug 8, 2012 at 2:02 PM, Dennis C. <capt...@yahoo.com> wrote: > John, > > Been down this road on a couple of boats with Yanmars. Likely problem > areas, poor connection or connector on the positive wire from the starter > switch, poor connection in the harness connector, poor connection or > connector at the solenoid. Same for all negative wires. > > First, make sure you're getting a reliable 12 volts to the input of the > ignition switch. > > If so, I would first replace the connector on the positive wire on the > starter switch. Use a marine grade connector and coat both the connection > and connector with USS TefGel and re-attach. > > If that doesn't fix it, test the switch several times with an ohmmeter. > It should work immediately each try. If it doesn't replace it. > > Next, pull the engine harness connector apart, spray it with Boeshield T-9 > (not WD-40), push it back together and pull it apart several times. See > how that works. If it works, pull it apart, coat the connections with USS > TefGel, put it back together and tape the mating surfaces. > > Next, replace the connector on the positive wire at the solenoid. > > The above steps have fixed intermittent starter problems on at least two > Yanmar powered boats I've worked on. > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > > ------------------------------ > *From:* John Russo <johnrussob...@optonline.net> > *To:* CnC-List@cnc-list.com > *Sent:* Wednesday, August 8, 2012 8:22 AM > *Subject:* Stus-List Starting problems > > I just developed intermittent electrical starting problems on my 1984 C&C > 32 with a 2GMF engine. I assume it is either the starting push button > switch or the Solenoid and an off to the boat to investigate and hopefully > confirm prior to a one week cruise starting this weekend. The engine > control panel is a Type B and I was wondering if anyone knew the make and/ > or part #’s of a compatible push button switch and starting Solenoid. > > Thanks you in advance for any answers/suggestions. > > John > Arpeggio > Norwalk,CT > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > -- Joel 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com