Al.
I have a 25 lb CQR anchor and put it in position on the standard 32 roller and push the anchor pin through a hole in the anchor which was already there and it doesn't go anywhere. This greatly simplifies anchoring as the hardest part for me is to get it out of the anchor locker and past the roller furler base. I do this once a year now. I do however secure a thin rubber matt over the anchor locker hatch so the shank does not grind it up if it moves and it does a little. I may change this to a small piece of outdoor carpet to avoid streaking the anchor locker hatch and can also tie the anchor shank to the toe rail. Hope this helps John Arpeggio 1984 C&C 32 Norwalk, CT From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Al Woods Sent: Tuesday, March 26, 2013 12:03 PM To: cnc-list@cnc-list.com Subject: Stus-List C&C 32 Securing Anchor on Bow I have a Delta 22lb fast set that I would like to keep on the bow roller on my 32 occasionally. Last year I rigged up something with carabiners and nylon webbing that was not particularly elegant or secure. I have purchased 2 different anchor tensioners that I have not have the courage to install (Windline & Lewmar). How can I secure that thing up there with the least amount of work? Al Woods
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
