Joel,
I have a Universal. The cable works fine -- it's just at a tough angle
and I want to move it.
However, Rick has me fully intrigued with the remote option. Any lead
as to where I can find the parts online??
All the best,
Edd
Edd M. Schillay
Starship Enterprise
C&C 37+ | Sail No: NCC-1701-B
City Island, NY
Starship Enterprise's Captain's Log Website
On May 21, 2013, at 10:35 AM, Joel Aronson <joel.aron...@gmail.com> wrote:
> Edd,
>
> Do you have a Yanmar? If the cable is corroded it is hard to pull (I broke
> my instrument panel last year mine was so corroded). You might need a new
> cable. The new one requires no effort.
>
> Joel
> 35/3
> Annapolis
>
>
> On Tue, May 21, 2013 at 10:30 AM, Rick Brass <rickbr...@earthlink.net> wrote:
> The Universal M35B in Imzadi does not have the original pull cable to stop
> the engine. Instead, there is a solenoid mounted on an L bracket on the aft
> starboard side of the engine block. The coil of the solenoid pulls in a
> “plunger” which pulls a thin metal rod attached to the shutoff lever on the
> injection pump. When the solenoid is deactivated, the rubber boot that covers
> the plunger pulls the plunger forward and releases the stop lever. All this
> is activated by a push button installed in the engine panel and powered by
> the +12v feed to the panel.
>
>
>
> It works well for me, and eliminates one cable run. Westerbeke sells a remote
> start/stop panel, so you could probably identify all the needed parts fairly
> easily (you would only need the remote stop parts for your engine.
>
>
>
> Rick Brass
>
> Washington, NC
>
>
>
>
>
>
>
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd
> Schillay
> Sent: Tuesday, May 21, 2013 9:45 AM
> To: cnc-list@cnc-list.com
> Subject: Stus-List Location of the Pull-Stop Engine Control
>
>
>
> Listers,
>
>
>
> I'm looking to move the location of the T pull-stop control for
> my engine on the Enterprise (C&C 37+).
>
>
>
> Currently, it's mounted horizontally near the control panel and
> very close to the cockpit floor -- which is a difficult angle to pull from
> when you're at the helm.
>
>
>
> I was curious where other owners have theirs mounted (if you have
> one -- I know some engines just throttle down to off) and what hardware you
> used to put it there.
>
>
>
>
> All the best,
>
>
>
> Edd
>
>
>
>
>
> Edd M. Schillay
>
> Starship Enterprise
>
> C&C 37+ | Sail No: NCC-1701-B
>
> City Island, NY
>
> Starship Enterprise's Captain's Log Website
>
>
>
>
> _______________________________________________
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
>
>
>
> --
> Joel
> 301 541 8551
> _______________________________________________
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
