Hi Mike,
Like Steve says, mine are friction fit to a deck plate, with a round
foam gasket kinda like an O-ring as the seal. Wiggle & lift to remove.
This list is better 'n google :)
Cheers, Russ
Sweet mk-1
At 02:55 PM 10/08/2013, you wrote:
Unless it is the new style, just pull on it and wiggle it from side
to side at the same time. Think flexible plastic hose barb stuck
into a pastic tube. Same as the Nicro vents which are not solar,
like the ones on the top of the transom of most C&C yachts. Not sure
your 37 has them, but most of the older models do. If the PO had a
leak and decided to glue it in with some sort of calking then all
bets are off, but that is how it is supposed to work.
Steve Thomas
C&C27 MKIII
Port Stanley, ON
-----Original Message-----
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com]On Behalf Of Persuasion
Sent: Saturday, August 10, 2013 5:41 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Solar Vents
Has any one removed Nicro solar vents. It looks as though they may
be applied from the outside held in place by caulking. I removed
the outside SS cover and if I started the fan it would continue to
run for a few seconds. It was very dirty and I want to remove it to
clean it. It is applied over the cowl vent so I cannot access it
from the inside.
Thanks
Mike
S/V Persuasion
C&C 37 Keel/CB
Long Sault
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
