I have now a Campbell Sailer prop RH 13 x 8 x 7/8, with a 2QM15 Yanmar engine. The boat cruise 6+ kn at 2400 Rpm and I can still push the throttle to reach the max 3000 RPM. Very happy too.
Andre Triumph II 1980 C&C 30 MKI -----Message d'origine----- De : CnC-List [mailto:cnc-list-boun...@cnc-list.com]De la part de Aaron Rouhi Envoyé : 13 août 2013 15:57 À : cnc-list@cnc-list.com Cc : CnC-List@cnc-list.com Objet : Re: Stus-List WHAT size of props should I put on my C&C 30MK 1 I have recently switched to a Campbell Sailer Prop CS3RH13x7x7/8. It's a fixed three blade, Right Hand rotation, 13" diameter x 7" pitch for 7/8" SAE Std. taper shaft. I'm very happy with it. Very reasonable price, less prop walk and much less vibration compare to the old two blade MW... I have a 2QM15 on my boat. Cheers, Aaron Admiral Maggie 1979 C&C 30 MK1 On Aug 13, 2013, at 3:29 PM, "Curtis" <cpt.b...@gmail.com> wrote: > I have just put a 2gm20F 18 hp > taking out a 2GM 13hp. > I have a Prop15Dx9P2 mertec folding prop. It has little to no reverst > and very little thrust foward? What is a good choice for a 2 ot 3 > fixed blade prop for a 1981 C&C 30 MK1 with a 2gm20F and a kanzai > KM2P. > Thanks for your help > -- > “The pessimist complains about the wind; the optimist expects it to > change; the realist adjusts the sails.” > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com