For anyone who might need them, I have a pair of new Edson pedestal mount
engine control handles. Just the handles, not the assembly.
Contact me off list if interested.
Dennis C.
Touche' 35-1 #83
Mandeville, LA
>________________________________
> From: "dre...@gmail.com" <dre...@gmail.com>
>To: cnc-list@cnc-list.com
>Sent: Tuesday, December 3, 2013 9:18 AM
>Subject: Re: Stus-List Stiff throttle
>
>
>
>Hi,
>
>
>I had a cable once that was also painfully stiff to a point that I broke the
>handle trying to move it. It turned out that cable housing was split at a
>point near the middle of the cable which allowed the inner cable to corrode at
>that location. A new cable and self-manufactured handle fixed it. You
>may want to check along the cable bends for split cable housings and replace.
>
>
>
>On another boat, I once saw a stiff cable caused by an over tight clamp near
>the injector. It was fixed just by loosening the clamp a bit.
>
>
>
>
>
>
>-
>Paul E.
>1979 C&C 29 Mk1
>S/V Johanna Rose
>Carrabelle, FL
>
>On Dec 3, 2013, at 9:07 AM, cnc-list-requ...@cnc-list.com wrote:
>
>Date: Mon, 2 Dec 2013 22:03:28 -0800
>>From: kevindrisc...@gmail.com
>>To: cnc-list@cnc-list.com
>>Subject: Stus-List Stiff throttle and belt recommendations for Yamar 2GM20on
>>cnc 30 mkII
>>
>>
>>(4) - The throttle is painfully stiff to the point I almost need two hands to
>>move it. Is there an easy lubrication point to get it moving again till I
>>can replace the cable?
>>Thanks everybody.
>>Kevin
>>
>>s/v Osprey
>>
>>C&C 30 mkII
>>Pic from Thanksgiving:
>>https://docs.google.com/file/d/0BwhcX19YaPJ8QWtlbGE2NzhYRzQ/edit?usp=docslist_api
>>Sent from my Tablet
>>
>
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com