Here's a pic of it in operation. It worked very well. Thanks again, Bill. http://farm4.staticflickr.com/3720/11356246664_97ff1bb057_h.jpg
It also worked to press the new bearing in. http://members.shaw.ca/parmesanshift/images/IMG_2428.jpg On 13 December 2013 09:18, Robert Abbott <robertabb...@eastlink.ca> wrote: > Josh: > > I believe Dwight Venoit on this list made a tool to remove a cutlass > bearing ......he will respond when he reads this....stay tuned! > > > Rob Abbott > AZURA > C&C 32 - 84 > Halifax, N.S. > > > On 2013/12/13 11:57 AM, Joel Aronson wrote: > > Josh, > > I'm trying to avoid the step of "removing the shaft". Internet wisdom > also says you can make your own tool, but I don't know if I can find > something sized properly to push out the old one. If the yard has the tool > I may pay them to do it. > > Joel > > On Friday, December 13, 2013, Josh Muckley wrote: > >> Internet wisdom says that if you don't mind removing the shaft, a hack >> saw threaded up the cutlass will remove it and a length of all thread and >> some washers will install it. Let us know what works. >> >> Good luck, >> Josh >> On Dec 13, 2013 9:54 AM, "Joel Aronson" <joel.aron...@gmail.com> wrote: >> >>> For 50 I would buy it. The one I saw was 400! Can you point me in the >>> right direction? >>> >>> On Friday, December 13, 2013, Josh Muckley wrote: >>> >>>> Nope, but if you end up buying one... I remember seeing one where you >>>> didn't have to remove the shaft. I think it ran about $50. >>>> >>>> Josh >>>> On Dec 13, 2013 8:28 AM, "Joel Aronson" <joel.aron...@gmail.com> wrote: >>>> >>>>> All, >>>>> >>>>> Does anyone in the Annapolis area have a cutlass bearing removal >>>>> tool for a 1 inch shaft that I could borrow? >>>>> >>>>> Thanks! >>>>> Joel >>>>> 35/3 >>>>> The Office >>>>> Annapolis >>>>> >>>>> >>>>> -- >>>>> Joel >>>>> 301 541 8551 >>>>> >>>>> _______________________________________________ >>>>> This List is provided by the C&C Photo Album >>>>> http://www.cncphotoalbum.com >>>>> CnC-List@cnc-list.com >>>>> >>>>> >>> >>> -- >>> Joel >>> 301 541 8551 >>> >>> _______________________________________________ >>> This List is provided by the C&C Photo Album >>> http://www.cncphotoalbum.com >>> CnC-List@cnc-list.com >>> >>> > > -- > Joel > 301 541 8551 > > > _______________________________________________ > This List is provided by the C&C Photo > Albumhttp://www.cncphotoalbum.comcnc-l...@cnc-list.com > > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > -- Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
