FWIW, Brightside works fine for me for bootstripe. I can easily touch up any scars in the bootstripe each spring and PoliGlow does an amazing job of making the touchups blend and it all looks brand new. I don't see the value in the two part paints as they need measuring and mixing and if you add a flattener, it's a two part flattener, making it a four part paint. I remember reading somewhere that Interlux recommends using their single part paints for high traffic areas or places that might get scraped, anywhere you expect to be touching up now and then. It's so easy to just open a can of brightside and pour a thimble full in a plastic cup and dab on a bit of paint and throw away the brush and cup.
Chuck Resolute 1990 C&C 34R Atlantic City, NJ ----- Original Message ----- From: "Joel Aronson" <joel.aron...@gmail.com> To: cnc-list@cnc-list.com Sent: Tuesday, February 4, 2014 1:25:26 PM Subject: Re: Stus-List boot stripe David, The data sheet says not to apply over other paint. Did you ignore that (as I would)? Other than mixing it, is there any difference in the application process? Joel On Tue, Feb 4, 2014 at 1:01 PM, David Drake < d...@rogers.com > wrote: I used to use Brightsides and redid the boots stripe yearly . Changed 3 years ago when I painted the boat and did the boots stripe in 2 part Interlux Perfection . I haven't had to redo the stripe since .I would strongly suggest switching to a 2 part paint ,in the end the added work to apply is more than offset by its durability DDrake 73 JH C&C 26 On Feb 3, 2014, at 11:00 AM, Joel Aronson < joel.aron...@gmail.com > wrote: <blockquote> Monty, Thanks! If only the weather cooperates! Joel On Sun, Feb 2, 2014 at 6:19 PM, Monty Schumpert < jmschump...@verizon.net > wrote: <blockquote> Joel, I used Interlux Brightside for the blue boot stripes on my 34+. I have done them 3 times, 2 coats each time, and still have some left from a quart can, so a quart of each color should be plenty. Monty Scandia 1991 C&C 34+ Annapolis, MD Sent from my iPad > On Feb 2, 2014, at 4:42 PM, Joel Aronson < joel.aron...@gmail.com > wrote: > > All, > I'm hoping it will warm up enough for me to repaint the red boot stripe and > raise the blue boot stripe on my 35/3. How much paint do i need to do 2-3 > coats of each color? > > Joel > > > -- > Joel > 301 541 8551 > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com -- Joel 301 541 8551 </blockquote> <blockquote> _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com </blockquote> _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com </blockquote> -- Joel 301 541 8551 _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
