Gets my vote. Dennis C.
Sent from my iPhone > On Mar 26, 2014, at 1:20 PM, "Gary Nylander" <gnylan...@atlanticbb.net> wrote: > > As most screws get 'screwed' up - no pun intended' , I would vote for the > Robertson head screws in stainless, and an electric screwdriver. > > Gary > ----- Original Message ----- > From: RAYMOND SHIBE > To: cnc-list@cnc-list.com > Sent: Wednesday, March 26, 2014 1:31 PM > Subject: Re: Stus-List floor board fasteners > > For the price of the PYC fasteners you could buy a battery powered > drill/screw driver and simply use regular screws. My near future plans are to > use "T" nuts from McMaster and Carr as the threads in the anchor > points for my floor boards are no longer viable. > Ray Shibe > > > On Wed, Mar 26, 2014 at 11:13 AM, wwadjo...@aol.com wrote: > > I am redoing my cabin floorboards. Previous owner had them screwed down. > Very difficult to remove for inspection. > Anyone have link/suggestion for other options for securing with better > access? I thought I had saved a similar question but can't find it. > Bill Walker > Evening Star > CnC 36 > Pentwater, Mi. > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com