I removed the fiberglass hood on my 29 mk 2. It lifts straight off the cabin top when you remove all the screws around the perimeter.
When the hood is removed, the plexiglass sliding hatch lifts off the teak "runners and you should be able to refinish them with no trouble. Make sure that you fill the holes in the cabin top with sealant before you screw it back down ... you will have leaks if you do not reseal the screws Best regards, Bob Hickson, P. Eng, RHI, CEA C&C 29-2 Flying Colours Frenchman's Bay Yacht Club Pickering, ON (416) 919-2297 <mailto:bobhick...@rogers.com> bobhick...@rogers.com ~~~~ __/) ~~~~
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
