Thank you. So my next step is to have the tach checked to see if is under reading.
-- Jonathan Indigo C&C 35III SOUTHPORT CT > On Aug 17, 2014, at 11:15, Rick Taillieu via CnC-List <cnc-list@cnc-list.com> > wrote: > > From the Yanmar Shop Manual: > > 3GMF: 20hp@ 3400 rpm > no load idle - 850 rpm > no load full throttle rpm - 3750 rpm. > > Rick Taillieu > Nemesis > '75 C&C 25 #371 > Shearwater Yacht Club > Halifax, NS. > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Indigo via > CnC-List > Sent: August-17-14 10:17 > To: cnc-list@cnc-list.com > Subject: Stus-List Yanmar 3GMF max rpm > > Does anyone know what the max rpm is for the 3GMF engine? My tach reads 3000 > with my throttle pushed all the way to the pedestal guard. The link here > www.yanmarhelp.com/operate.htm seems to indicate 3000 is the maximum - but I > think I have read on this list that 3500 is the max for this engine. > > -- > Jonathan > Indigo C&C 35III > SOUTHPORT CT > _______________________________________________ > This List is provided by the C&C Photo Album > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go bottom of page > at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
