And I’ll just add that Atlantic Spars in Annapolis rebuilt my rig so I’ll
second Joel’s recommendation. Give’m a shout.
Dave Godwin
1982 C&C 37 - Ronin
Reedville - Chesapeake Bay
Ronin’s Overdue Refit
On Aug 21, 2014, at 3:56 PM, Joel Aronson via CnC-List <cnc-list@cnc-list.com>
wrote:
> My 35 takes a 7/16, so I'm not surprised it is a 9/16.
>
> Got one from Atlantic Spars in Annapolis.
>
> Joel
> 35/3
>
>
> On Thu, Aug 21, 2014 at 3:54 PM, Bill Coleman via CnC-List
> <cnc-list@cnc-list.com> wrote:
> You should have some digital calipers, (or borrow some) and measure the pin
> on the other side. Hit the button between metric and inches and you may find
> out which it is based on. Someone has to sell them.
>
>
>
> Bill Coleman
>
> C&C 39
>
> On 8/21/2014 1:47 PM, Richard N. Bush via CnC-List wrote:
>
>
>
> I have run into an unusual problem; I lost a clevis pin from the lower
> shroud, ("someone" didn't spread the cotter pin apart enough), and the pin
> vibrated out under sail; (that was pretty scary!); I thought replacing the
> pin would be easy, but I can't seem to find the part anywhere; the boat is a
> 1985 37 with the original rod rigging, (Navtec I assume); measuring the pin
> from the other shroud I get metric measurements at 1 1/2 MM diameter and 4 MM
> long; I have contacted several sources; (Defender, Rig Rite, Hayn and
> Navtec); all of whom tell me it shouldn't be metric but should be imperial
> measurement; however I tried a 1/2 inch diameter pin in there and it is much
> too small, and 5/8s is too large...I need help; can anyone steer me toward a
> source for the pin? (PS there are no marine riggers or facilities in our
> area, we don't even have a West Marine!);
>
> Many thanks
>
>
>
>
>
> Richard
>
> 1985 37, CB Ohio River Mile 584;
>
>
> _______________________________________________
> This List is provided by the C&C Photo Album
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go bottom of page
> at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
>
>
>
> --
> Joel
> 301 541 8551
> _______________________________________________
> This List is provided by the C&C Photo Album
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go bottom of page
> at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
_______________________________________________
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
