I used Sikaflex, seems to have worked fine Dwight Veinot C&C 35MKII, Alianna Head of St. Margaret's Bay, NS
-----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Connon via CnC-List Sent: September 19, 2014 8:12 AM To: cnc-list@cnc-list.com Subject: Stus-List Caulking for keel bolts Gentlemen, I raised the mast about 2 ft. yesterday for the first time in several years and found the keel bolt relatively loose with very little caulking under the SS washer. I would like to know what are the best choices in caulking compound to use under the washer. I would assume that you lay down a generous bed of compound, tighten the nut lightly, allow to set for 24 hrs, and then torque to the 350 ft/lbs required. Thanks in advance for any advice. Bill Caprice 1 1978 C&C 36 _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4765 / Virus Database: 4015/8224 - Release Date: 09/16/14 _______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
