Josh
There's a pretty good look at it here
https://www.flickr.com/photos/37365243@N00/7544710028/in/set-72157629350057893
Probably a few other in the folder on flickr as well.
I think this was done with off the shelf components, though I am not
sure. I have seen similar stuff at Fisheries Supply among their SS deck parts.
http://www.fisheriessupply.com/marine-hardware/tubing-handrails-rail-and-canvas-top-fittings/rail-fittings-and-mounting-brackets
Tom B
Message: 5
Date: Sat, 22 Nov 2014 14:24:07 -0500
From: Josh Muckley <muckl...@gmail.com>
To: Tom Buscaglia <t...@sv-alera.com>, "C&C List"
<cnc-list@cnc-list.com>
Subject: Re: Stus-List 37+ handrail removal
Message-ID:
<ca+zacrdq__btca1ggu7h5wncgsf_ifk1fbvsurd++_9tso2...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Tom can I get pictures of the stainless? Do you know where your stainless
rails came from? I'm looking to have them made by White Water Marine Inc.
On Nov 22, 2014 1:13 PM, "Tom Buscaglia via CnC-List" <cnc-list@cnc-list.com>
wrote:
> Josh
>
> I'll check too. But probably not til next week. SHe's in the shop
> getting the dripless bearing dripless again and a full tune up.
>
> BTW, my PO replaced the deck handrails with stainless. My wife Lynn, who
> handles all the bright work, was very pleased!
>
> Tom B
>
> At 09:00 AM 11/22/2014, you wrote:
>
> Message: 2
> Date: Sat, 22 Nov 2014 11:39:52 -0500
> From: Ron Ricci <rvri...@gmail.com>
> To: "'Josh Muckley'" <muckl...@gmail.com>, "'C&C List'"
> <cnc-list@cnc-list.com>
> Subject: Re: Stus-List 37+ handrail removal
> Message-ID: <027601d00672$f1157ca0$d34075e0$@gmail.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Josh,
>
> If helpful, I'll take a look at mine (1991). It may not be for a few
> weeks.
>
> Regards,
> Ron
> Ronald V. Ricci
> S/V Patriot
> C&C 37+
> Bristol, RI
>
> < mailto:ron.ri...@1968.usna.com <ron.ri...@1968.usna.com>>
> ron.ri...@1968.usna.com
>
>
> From: Josh Muckley [ mailto:muckl...@gmail.com <muckl...@gmail.com>]
> Sent: Saturday, November 22, 2014 4:50 AM
> To: C&C List
> Subject: Stus-List 37+ handrail removal
>
> Any of you 37+ owners know how to get to the aft most mounting screw on
> the
> port handrail? It looks like it's inside nut is above the headliner of the
> head or maybe above the forward bulkhead of the head, between the salon
> headliner and the head headliner.
>
> I am fine pulling the head's headliner except that it looks like it is
> laminated to the cabin top (near the windows at a minimum). Same with the
> significantly larger salon headliner. I think an access hole and plug are
> in order but where best to put one is the question.
>
> Thanks guys,
>
> Josh Muckley
> S/V Sea Hawk
> 1989 C&C 37+
> Solomons, MD
>
*****************************************
Tom Buscaglia
SV Alera
1990 C&C 37+/40
Vashon Island WA
(206) 463-9200
www.sv-alera.com
_______________________________________________
This List is provided by the C&C Photo Album
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go bottom of page
at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
