Hey Jim

Where's the best place in Victoria to get a recert? Mind you, my tank is 
fiberglass ... not sure if that's an issue with where I take it.

Peter
C&C27
Cygnet
North Saanich




Sent from Samsung tablet

-------- Original message --------
From: Jim Watts via CnC-List <cnc-list@cnc-list.com> 
Date: 02-21-2015  10:12 AM  (GMT-08:00) 
To: Ron Ricci <rvri...@gmail.com>,1 CnC List <cnc-list@cnc-list.com> 
Subject: Re: Stus-List Refilling 10 lb propane tank 
 
Around here, it costs $25 or so to recertify a tank and replace the valve. I 
think the aluminum one on the boat is close to original, it has been 
recertified so many times that the stamps are getting blended. 

Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC

On 21 February 2015 at 07:38, Ron Ricci via CnC-List <cnc-list@cnc-list.com> 
wrote:
The OPD is “Overflow Protection Device”.  It prevents any kind of tank, 
regardless of material or age, from being overfilled which could cause a tank 
failure. 

 

Regards,

Ron

Ronald V. Ricci
S/V Patriot

C&C 37+

Bristol, RI

ron.ri...@1968.usna.com

 

 

 

From: Jake Brodersen [mailto:captain_j...@cox.net] 
Sent: Saturday, February 21, 2015 8:32 AM
To: 'mike amirault'; cnc-list@cnc-list.com
Subject: Re: Stus-List Refilling 10 lb propane tank

 

Mike,

 

I have an aluminum tank from my boat that doesn’t have an OPD valve on it.  No 
way to get it filled unless I replace the valve with the newer “safe” variety.  
Never heard of problems with the tank material though.

 

Jake

 

Jake Brodersen

“Midnight Mistress”

C&C 35 Mk-III

Hampton VA

 

 

 

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of mike 
amirault via CnC-List
Sent: Friday, February 20, 2015 6:09 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Refilling 10 lb propane tank

 

Hello all. I brought my 10lb aluminum tank to Costco Halifax today for a 
refill. The attendant did fill it but informed me that they are not supposed to 
fill them any more because aluminum tanks are considered "commercial" and are 
to be taxed accordingly which Costco is not set up to do at the pumps. This 
sounds like a lot of BS to me. Has anyone else run into this?


_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com



_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to