Bacon's has old Laser daggerboards cheap. I used one for my emergency rudder contraption. I need to go there anyhow, so I could see what they have.
Joel 35/3 Annapolis On Wed, Mar 11, 2015 at 12:52 PM, Brent Driedger via CnC-List < cnc-list@cnc-list.com> wrote: > Thanks. If I don't have any info on it by May Id be very happy to get it > from you then. I was considering plywood too. My old Bonito daggerboard is > ply and it works well. I was thinking the invitation might have a more > built up foil shape like a Laser which may be a little harder to make from > plywood. > > Brent > > Sent from my iPhone > > > On Mar 11, 2015, at 11:34 AM, Marek Dziedzic via CnC-List < > cnc-list@cnc-list.com> wrote: > > > > Bent, > > > > I have a boat like this, as well. I have it at the cottage, so I cannot > take any measurements at this time. It won't happen until some time in May > (if you are still interested). > > > > I found a manual here: > http://www.iei.liu.se/flumes/bjorn/triss_racer?l=en (it is big and the > connection is not the fastest, but you can get it form there). > > > > The daggerboard that I have is a reasonably simple thing. the top is > shaped to fit into the opening; the bottom is wing shaped (tapered at the > leading and the trailing edge) and the front and the back are parallel. > Personally, I would make it of wood (and use good varnish on top). That > thing has to be reasonably strong, as you will want to step on it, when > righting the boat. > > > > If you are willing to wait for the measurements, let me know; I will > take some pictures and dimensions, when I get there. > > > > Marek > > > > -----Original Message----- From: Brent Driedger via CnC-List > > Sent: Wednesday, March 11, 2015 12:02 PM > > To: C&C List Canada > > Subject: Stus-List Composite project (not C&C related directly) > > > > Good day folks. > > Last year I was gifted a tired Bombardier Invitation 3.8. With a little > TLC I'll get her sailing agains but the boat came without a daggerboard. > I'm going to make a composite one. Two questions. I've scoured the Internet > for a design detail of the board but have come up with nothing. Does anyone > have any links they know of or information that could be helpful? Second, > for the composite masters, what would be the best core choice and layup for > this project? Will fibreglass be fine or should I go with Kevlar? > > Thanks. > > > > Brent Driedger > > 27-5 > > Lake Winnipeg. > > > > Sent from my iPhone > > _______________________________________________ > > > > Email address: > > CnC-List@cnc-list.com > > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > > > _______________________________________________ > > > > Email address: > > CnC-List@cnc-list.com > > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > -- Joel 301 541 8551
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
