Can you have a stainless one fabricated? Add a nice bow roller for your anchor while you're at it.
Dennis C. On Mon, Mar 16, 2015 at 2:05 PM, Pete Shelquist via CnC-List < cnc-list@cnc-list.com> wrote: > Unfortunately South Shore doesn't have this piece. Still looking for > other > sources. > > Thanks, > > > -----Original Message----- > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill > Bina > via CnC-List > Sent: Monday, March 16, 2015 1:21 PM > To: cnc-list@cnc-list.com > Subject: Re: Stus-List 37 stemhead casting > > When I needed the boom end of the gooseneck for my 27-5, it took them a > couple days to go look in storage, but they found a brand new casting that > had not even had the final holes drilled and machining done on it. > > Bill Bina > > On 3/16/2015 1:16 PM, Joel Aronson via CnC-List wrote: > > Pete, > > > > did you try South Shore Yachts? They have many original parts. > > > > Joel > > > > On Mon, Mar 16, 2015 at 12:57 PM, Pete Shelquist via CnC-List > > <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote: > > > > I'm looking for a stemhead casting, sometimes called a bowplate,for > > a early 80s vintage 37. Please forwardsalvage yards or other > > sources you may be aware of.____ > > > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
