Hi sounds to me like the 1st coat was not dry completely Brian Donovan 112 Frisbee Hill Rd Hilton NY 14468 (585) 313-1940
> On Apr 27, 2015, at 10:12 AM, Marek Fluder via CnC-List > <cnc-list@cnc-list.com> wrote: > > The specs are calling for at least 2 coats when stripped to bare fiberglass. > First one came out nicely rolled on with 4" foam roller. > When I started the second coat I've noticed the first one gets dissolved and > white fiberglass is showing. > This brought the memories when I've done the same on my previous C&C24 - back > then I managed to do the second coat, but it was a struggle. > I am thinking of leaving only 1 coat on as it looks good. > > Has anyone put on 2 consecutive coats and what was the experience? > > Marek > C320 > Hamilton, Ontario > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom > of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
