I tried the usual recommends on this list when I went through this a few years back and I found what I needed here: http://www.plastic-mart.com/category/159/marine-holding-tanks
What I did is make some rough measurements of the space that the tank needed to fit into, then I found a few near matching tanks. When I narrowed it down to the one I thought was going to fit I built a model out of cardboard to match the dimensions on the site and did a test fit. It fit perfectly so I ordered that tank. The bonus was that the tank was only $240 or something! Going through Kracor I would have spent closer to $700. The primary consideration was fit however. A PO had installed an "upgraded" stainless tank. I bet that cost a bundle. Steve Suhana, C&C 32 Toronto On Thu, Jun 25, 2015 at 7:36 AM, Paul Fountain via CnC-List < cnc-list@cnc-list.com> wrote: > Try Kracor, they made a lot of the original poly tanks in C&C’s > http://www.kracor.com/. Or Moeller Marine http://www.moellermarine.com/ > > > > *Paul Fountain* > > *Managing Director* > > *SeaSource Inc.* > > *Bookkeeping & IT Services.* > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Gary > Russell via CnC-List > *Sent:* Thursday, June 25, 2015 7:30 AM > *To:* C&C List > *Cc:* Gary Russell > *Subject:* Stus-List Holding Tank for C&C 37 Plus > > > > As per previous post I have bought a C&C 37 Plus and am in need of a new > holding tank. The existing tank in aluminum and is 25 years old. Guess > what, it leaks. Does anyone know where i can get a poly tank for it? It > is wedge shaped. > > > > If not, does anyone know where I can get one made? > > > > Gary > > C&C 37 Plus > > S/V High Maintenance > > East Greenwich, RI, USA > > ~~~~~~~_/)~~~~~~ > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
