The Webasto factory parts we replaced last month (after 16 years of use) returned Calypso's T-90S to "like new" performance. I did not see a "made in China" label on the new burner assembly. Even after the 16 years of use (+-350 hours) the old burner assembly was at an estimated ½ life but we chose to replace it as the service calls get expensive if done at a remote location.
The Sure Marine tech noticed our original furnace installation did not have enough intake hose length to balance the intake and exhaust pressure. A $10 piece of hose added to the intake made the furnace's start up faster and quieter. Martin DeYoung Calypso 1971 C&C 43 Seattle [Description: Description: cid:D1BF9853-22F7-47FB-86F2-4115CE0BAF2F] From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Coleman via CnC-List Sent: Tuesday, December 15, 2015 10:57 AM To: cnc-list@cnc-list.com Cc: Bill Coleman Subject: Re: Stus-List Wabasto furness Look at all those knock off hoverboards, blowing up like Pintos! Personally, I would get the Wasbasto. If, when you get it, it sez, 'Made in China', then I don't know what to say . . . Bill Coleman C&C 39 Erie, PA From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Fred Hazzard via CnC-List Sent: Tuesday, December 15, 2015 11:51 AM To: cnc-list@cnc-list.com Cc: Fred Hazzard Subject: Stus-List Wabasto furness I need to replace the dosing pump on my Wabasto airtop 3500/ 5000 furness.  I can buy a Wasbasto replacement for about $200 or a Chinese one for about $75 on ebay. I am looking for listers feelings about using the knock off  pump . Fred Hazzard S/V Fury C&C 44 Portland, Or
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
